Key Systems - Corbin Russwin

ApplicationsKey SystemsTable of ContentsDesigning Master Key Systems....... 3Key Wizard ® ............................. 4How to Order Cylinders............ 5Cylinder and Key Stamping....... 6Temporary Access..................... 7Conventional Cylinders............. 8Interchangeable Core.............. 14Security................................... 17Master Ring............................ 19Pyramid.................................. 21Bump Resistant Cylinders........ 28Key Blanks.............................. 29Keyways................................. 31Mortise Cylinder Cams............ 40Cylinder Accessories................ 41Plug Diameters/Quick Codes... 43Service Equipment.................. 45Policies and Procedures........... 49How to Establish Key Systems. 50ApplicationsTo provide the desired level of security, even the finest architectural hardware requires aproperly designed and maintained master key system.The keying system is the “software” of a building's security. As shown in the schematicbelow, it turns each hardware product into an access control device.The choice of cylinder mechanism must be planned together with the keying system.The variety of mechanisms available from Corbin Russwin offers the right balance ofsecurity, convenience and expansion capability for every job.AGrand MasterAAMasterMaintenanceABMasterPerimeterACMasterAdministratorADMasterDoctors’ OfficesAEMasterNursingAFMasterFood ServiceAA1ElectricalClosetsAB1BuildingEntrancesAC1Chief ofStaffAD1101AE12nd FloorAF1Kitchenwww.corbinrusswin.comAA2PhoneClosetsAB2Exit AlarmsAC2PersonnelAD2102AE23rd FloorAF2CafeteriaAA3Heating andAir Cond.AB3GatesAC3AccountingAD3103AE34th FloorAF3Food StorageAA4JanitorSuppliesAB4ParkingAC3AccountingAD4104AE45th FloorAA5Janitor closetsRestroomsAE56th FloorSKD1PharmacyKey Systems.245078-3/14

Designing Master Key SystemsKey SystemsCylinders and KeysStep 1Determine the type of locking system• Conventional “open & restricted keyways”- Not contract controlled• Patented locking system- A notice of acceptance will berequired between Corbin Russwinand Owner- Factory-based system- Key blank distribution restrictions arein place• Security (secondary locking mechanisms,example; Pyramid Security)• High security (same as Security plusUL437 – example; Pyramid HighSecurity)• Standalone access control lockingdevices (at door wiring, example;Access 800)- To facilitate multiple users throughcommon doors• Integrated locking systems (hard wiredinto access control systems)Step 2Establish the level of the master keysystem. The higher the level the lesssecure.• Level two – “Simple Master Key system”- Change key, and master key only• Level three – “Grand Master Key system”- Change key, master key, and GrandMaster Key• Level four – “Great Grand Master Keysystem”- Change key, master key, GrandMaster Key, and Great GrandMaster Key• Levels higher than four are notrecommended for security reasons- With more levels, additional masterpins in each chamber of the cylinderwould be required, and with theadditional master pins the possibilityof unauthorized key interchangescould occur*See pages 50-52 on How to Establish KeySystems.*Step 3Establish key hierarchy, key issuingpolicies and procedures, andadministrative disciplines.• Who, if anyone is authorized to carrythe top master key?• Who carries master keys and change keys?- Does every employee receive a key?45078-3/14• What disciplinary action(s) is being putin place for violations?- Fines or Deposits> Lost keys> Keys not returned- Will there be a key receipt required?> Where will that be kept?• Who is the systems administrator?- Authorized to purchase- Responsible for Key ControlAdministration• Who is the Key Control Administrator?- Maintain key control software &all transactionsStep 4System Layout• Helpful Hints- KISS “Keep It Simple System”> Do not use the term sub-master(not unless it’s level 6 and higher)• Lowest level possible• Key to the building security objectivesNOT to the people- Determine if the system is to bedesigned for Security or Convenience• No cross keying, especially with patentedlocking systems and higher• Key alike within master key groups asmuch as possible- Avoid top-heavy systems (example;few change keys used under masters)• Has the right function of lockset beenselected?- Storeroom vs. Classroom vs. Entry- Single cylinder vs. double cylinder> If double cylinder, how is theinside cylinder to be keyed?• Provide adequate quantity of keys- Top Master keys “limit the number ofthese to only a few”- Master keys “also limit the numberthese”- Change keys per key set and/or perkeyed alike sets- Special operating keys> Control keys “limit the numberof these”Separate the internal departmentsinto sectors, example are:• Perimeter- Including all exterior doors, roofsurfaces, gates and fences, andadjacent buildings.• Operations- Sensitive areas crucial to dailyoperations, such as plant engineering,security and mechanical operations.• Management- Areas that are vital for daily businessactivities, primarily human resources,administration, executive offices, IT,sales, and accounting.• Services- Areas that provide employees andvisitors with services, such asrestrooms, medical treatment areas,housekeeping, food service, retail(unless it's a leased outside source).• Unique Applications- Door openings requiring accesscontrol hardware where key overrideis required, or any other specialapplication which would be unique.• Tenants- Any tenants that are not part of thebuilding.Step 5Servicing & Maintenance• In-house or outside locksmith- Ensure proper training- Establish key cutting log- Establish service request procedures• Service equipment- Key kit- Code cutter that complies withsystems depths & spacingspecifications- Locksmithing tools, fixtures &accessories• Establish stock levels & requirements toavoid misuse of multi-section key blanks- Additional cylinders ready foremergencies- Additional key blanks (of all keyways)• Who or where are the key blanks goingto be kept?• Who is authorized to cut keys?- What form of work order will be usedto authorize cutting of keys?- Who will sign the work order?- What records will be kept & where?• What type of reports will be required?- Overdue keys- Miss-cut keys> Who receives the reports?• Once a key has been cut, whatinstructions are given to the recipient?- Key receipt recommended• Ensure that all transactions are recordedby the Key Control Administrator• ENFORCEMENT FROM THE START!SUPPORT AND BACK THOSE WHOARE RESPONSIBLE FOR MAINTAININGAND SERVICING THE SYSTEM.Key Systems.3

Key Wizard ®Key SystemsKey Management SoftwareAdvantagesA key management software programis essential for any type of organization.Keeping track of the key holders ina master key system is critical formaintaining key control and ensuring thesecurity and integrity of the system.Key Wizard by Corbin Russwin wasdesigned to provide a user-friendly toolfor facility end users to track detailedinformation concerning their keyingsystem. It offers improvements overexisting key management software byutilizing clutter-free and easily navigatedscreens. This system uses a Microsoft ®Outlook ® type of layout.Key control for a facility is maintainedby adopting a complete system ofpolicies, procedures, record keeping andspecialized products. A comprehensivekey management software program is oneaspect of a complete key control system.Key Wizard by Corbin Russwin providesthe facility with accurate informationconcerning keys, key holders, hardwarelocations, master key systems, overduekeys and maintenance service schedules,all of which can be customized.Features:• Free technical support and free software upgrades for one year• Customized query, report and search capability• Comprehensive hardware listings for door locations• Displays key holder photos and signatures for verification• Clear, easy to read screens• Automatic reminders for maintenance, back-ups and overduekeys• Network and standalone versions available• Accurate key symbol sorting• Audit trail tracks changes made to keyholders• Printing of door number labels to ensure proper cylinderinstallation• Key authorization tracking• Customized key receipts and authorization forms• Tracking of loaned keys and key deposits• Stores maintenance service history records• Can manage multiple end users and multiple key systems formost manufacturers• Importing of key systems, keyholders and locations• Exporting of key systems and locations• Global key search across multiple master key systems• Multi-level password protection• Download of key bittings to ITL9700 Code machine• Pinning CalculatorsComputer System Requirements:• 500 MHz processor or greater• Windows 98, 2000, ME, NT, XP, Vista or 7• 64 MB RAM• CD Drive• Mouse pointing device• 70 MB hard disk spaceDemo VersionDemo versions are available. Demos can be downloaded from theCorbin Russwin website at http://www.corbinrusswin.com orwww.keywizard.netHow to Order:All Key Wizard programs are licensed specifically to each facilityend user. Special online ordering procedures apply. The followinginformation is required for each system:End User Facility NameEnd User Contact IndividualMailing AddressPhone NumberKey Wizard Technical Support:1-800-610-1706Key Systems.445078-3/14

How to Order CylindersKey SystemsNumbering Scheme Overview10 0 0 – 118 – A01 – 6 – L4 – Finish x Options*Cylinder Type Mechanism Function Length Cam Pins Keyway10 Mortise11 Flex Head Mortise12 Concealed ShellMortise13 Thumbturn Mortise14 Dummy Mortise15 Access 3 Mortise - AP16 Access 3 Mortise - AS17 Access 3 Mortise - AHS20 Knob/Lever21 Continental Knob22 Competitor Knob/Lever23 Access 3 CompetitorKnob/Lever24 Competitor Keyways25 Access 3 KIK/KIL - AP26 Access 3 KIK/KIL - AS27 Access 3 KIK/KIL - AHS28 Access 3 CompetitorKIL - AS29 Access 3 CompetitorKIL - AHS30 Rim33 Thumbturn Rim35 Access 3 Rim - AP36 Access 3 Rim - AS37 Access 3 Rim - AHS42 Special Application44 DL2200, DL320045 Access 3 DL2200/DL3200 - AP46 Access 3 DL2200/DL3200 - AS47 Access 3 DL2200/DL3200 - AHS80 IC-Core Only (LFIC)85 Access 3 IC Core - AP86 Access 3 IC Core - AS0 Standard1 Security2 Pyramid3 IC PyramidCylinder (LFIC)4 SFIC Housing6 Master Ring7 LFIC Housing8 IC CompleteCylinder (LFIC)9 IC SecurityCylinder (LFIC)0 Standard1 Hotel2 Blockout3 Classroom4 Brink CW5 Brink CCW6 ObsoleteCrossbar ED62007 Pyramid Security8 UL Housing(Access 3)(Mortise Cylinder)100 1" (25mm)118 1-1/8" (29 mm)114 1-1/4" (32 mm)138 1-3/8" (35 mm)112 1-1/2" (38 mm)134 1-3/4" (44mm)200 2" (51 mm)214 2-1/4" (57 mm)212 2-1/2" (64 mm)234 2-3/4" (70 mm)300 3" (76 mm)314 3-1/4" (83 mm)312 3-1/2" (89 mm)334 3-3/4" (95 mm)(Rim Tailpiece)058 5/8" (16 mm)114 1-1/4" (32 mm) IC138 1-3/8" (35 mm)178 1-7/8" (48 mm) IC178V 1-7/8" (48 mm) vertical IC200 2" (51 mm)200V 2" (51 mm) vertical318 3-1/8" (78 mm) IC312 3-1/2" (89 mm)312V 3-1/2" (89 mm) verticalA01 CloverleafA02 StraightA03 Adams Rite ® MSA04 DL4000 SeriesA05 Adams Rite 4070A06 Schlage ® CloverleafA07 DL4100 SeriesA61 New MR Cloverleaflocksmade after 5/93A62 MR StraightA63 Large MR ShortA64 Large MR LongA65 Old MR Cloverleaf -locks made prior to5/93A92 Exit Grip Trim 01, 02A93 Obsolete Deadlocks:Corbin ® 610 Series andRusswin ® 1403 Series6 Standard7752852981ADHNXZAccess 3Pyramid87 Access 3 IC Core - AHS2300 RFC Padlock*For cylinder options, see pages 43-44FinishDescriptionSpecifyBright Brass 605Satin Brass 606Bright Bronze 611Satin Bronze 612Dark Oxidized Satin Bronze, Oil Rubbed 613Dark Oxidized Satin Bronze, Equivalent613EBright Nickel Plated 618Satin Nickel Plated 619Flat Black Coated 622Bright Chromium Plated 625Satin Chromium Plated 626Bright Stainless Steel 629Satin Stainless Steel 630Black Oxidized Bronze, Oil Rubbed 722Key Systems.545078-3/14

Cylinder and Key StampingKey SystemsVKC and CKCVisual and Concealed Key ControlWith these options, keys and/or cylindersare stamped with their respective keysetsymbol, so lock mix-ups during installationor key mix-ups afterwards are less likelyto happen – and easier to straighten outif they do. Lost keys are also easier toreplace. The coded information on thecylinder tells you how the cylinder is keyed,thereby eliminating trial and error.For example, the symbol AA1 shown inthe illustration identifies the lock to beoperated by grand master key A, masterkey AA and change key AA1. Uponwritten authorization from the buildingowner to an authorized Corbin RusswinDistributor, a bitting list can be furnishedfor each job to translate the symbols intokey bittings.If a key is lost, it can easily be replaced byreferring to the symbol on the cylinder andthe bitting on the bitting list. VKC is notavailable on Security or Pyramid cylinders.Visual Key Control (VKC)For Greater ConvenienceThe key symbol is stamped on the plugface or other visible portion of the front ofthe cylinder. (VKC is available on all keys,but not available on Security, CK4400Series Lockset or Pyramid cylinders.)AA1Concealed Key Control (CKC)For Greater SecurityFor greater security, specify CKC on thecylinders. The key symbol is stamped ina concealed location, such as the rear ofthe cylinder. It is not visible to the generaloccupants of the building but can beaccessed by authorized personnel uponremoving the cylinder from the lockset.The following codes and definitions have been established for specifying cylinder and key stamping:Quick CodeDefinitionVKC0No keyset, registry number, keyway, nor bitting stamping on any keys. Includes master keys and change keys. (Keys will be tagged.)VKC1VKC2Master keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*(Standard for high security and security cylinders.)Master Keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*Cylinders stamped with their keyset symbol on the face of the plug. (Not available for high security or security cylinders.)VKC3CKC2CKC3Master Keys stamped with their registry number. Change keys stamped with their bitting, keyway* and system. Cylinders stamped withtheir keyset symbol on the face of the plug. (Not available for high security or security cylinders.Master keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*Cylinders stamped with their keyset symbol in a concealed location.Master keys stamped with their registry number. Change keys stamped with their bitting, keyway* and system. Cylinders stamped withtheir keyset symbol in a concealed location. (Not available for high security, or security cylinders.)*Keyway will NOT be stamped on the keys for security or high security cylinders, nor restricted or protected keyways unless specifically requested as per thepurchase order. (KB18, KB19, KB28 or KB90 series)Key Systems.645078-3/14

Temporary AccessKey SystemsConstruction KeyingCONSTRUCTIONMASTERConstruction Master KeyingConstruction Master Keying (CMK) is a CorbinRusswin keying option that provides the extrasecurity needed in the transition from constructionof a building or complex to completion.The construction master key operates all CorbinRusswin cylinders while the building is underconstruction. Upon completion of the constructionphase, it can be voided without removing thecylinders from the locks, simply by turning thechange key in each cylinder. Interchangeablecore jobs with construction master keying furtherrequire a construction control key to install andremove cores during the construction phase.The permanent master and change keys for thesystem are always packed and shipped separately,and the order must include the names andaddresses of individuals to whom the construction,permanent master and change keys should besent.This feature is NOT available on Security orPyramid cylinders.SKD CautionUnless otherwise specified, SKD sets will beconstruction master keyed. When constructionmaster keying is established for SKD sets, CorbinRusswin issues a separate SKD CMK key as well asan SKD CMK Control key if required.How to Order CMKTo order locksets and/or cylinders with theconstruction master key feature, the quick codeCMK should be indicated as an option.Temporary Construction CoresLockableA more secure method of construction keyingfor interchangeable core hardware is the use oftemporary construction cores. Corbin Russwinrecommends this method of construction keyingfor IC jobs.Hardware is furnished with construction coresthat are keyed alike to a combination unrelatedto the permanent system’s master key. Whenthe building is turned over to the owner, thepermanent cores are installed and the temporaryconstruction cores can be returned to CorbinRusswin for credit.The IC temporary construction cores are availablein red, blue and green. The color optionsenhance the user's ability to easily control accessto different locations on a construction site, oridentify different locations for specific keyingapplications.How to Order LockableFor 6-pin, use quick code CT6IC 6-pin with Red temporary construction core (Red),CT6RIC 6-pin with temporary construction core (Blue), CT6BIC 6-pin with temporary construction core (Green), CT6GFor 7-pin, use quick code, CT7IC 7-pin with temporary construction core (Red), CT7RIC 7-pin with temporary construction core (Blue), CT7BIC 7-pin with temporary construction core (Green), CT7GFor Pyramid, use quick code CTP.Note: Orders specifying only CT6 or CT7 withoutthe color designation will receive the Red ICtemporary construction core by default.Examples:ML2051 x LSA x 626 x RH x CT61080 x 114 x A01 x 626 x CTPCL3355 x NZD x 626 x CT6B1080-114-A01 x 626 x CT6GPermanent cores must be ordered separately.DisposableCorbin Russwin offers two formats of disposabletemporary cores. These cores do not require keysfor their operation and no returns or credits are allowed.Disposable cores are available for Corbin Russwinlarge format interchangeable core (LFIC) housingsor for small format interchangeable core (SFIC)housings. Please note that Corbin Russwin doesnot provide permanently keyed SFIC cores.How to Order DisposableLFICFor 6-pin, use quick code CT6DFor 7-pin, use quick code CT7DFor Pyramid, use quick code CTPDExamples:ML2051 x LSA x 626 x RH x CT6D1080 x 114 x A01 x 626 x CTPDPermanent cores must be ordered separately.SFIC - Key-in-lever/knob locksetsFor 6- and 7-pin, use quick code CTSDSFIC - Mortise Locks and Exit Devices-Rim CylindersFor 6-pin housing, use quick code CLS6For 7-pin housing, use quick code CLS7Key Systems.745078-3/14

ConventionalKey SystemsMortiseMortise CylindersFor use with all mortise locks andDL3000 Deadlocks. IC: page 15.Security: page 17. Master Ring: page 20.Pyramid: page 24.Type Length Cam Pins Keyway Finish1000100 1"(see pages 605(see page 40)5 (1" length only)(5 pin only)31-39)118 1-1/8"(standard)A01 Cloverleaf 6 (standard) 606114 1-1/4" A02 Straight7 (available for1-1/4"-3")611138 1-3/8" A03 Adams Rite ® MS and 612112 1-1/2" DL3000 Deadlock 613134 1-3/4" A04 DL4000 Deadlock 622200 2" A05 Adams Rite 4070 625214 2-1/4" A06 Schlage ® Cloverleaf 626212 1-1/2" A07 DL4100 629234 2-3/4"A62 MR Straight / 900 SeriesMullion630300 3" A92 Exit Grip Trim 01 & 02 722314 3-1/4" A93 Obsolete deadlocks:312 3-1/2"334 3-3/4"Corbin ® 610 Series andRusswin ® 1403 SeriesFlexible Head Mortise CylindersUse Flexible Head mortise cylindersonly with sectional trim mortise locks.The head is spring-loaded to adjust forminor variations in door thickness. Seepage 20 for Master RingType Length Cam Pins Keyway Finish1100 100 1" (6-pin std.) (see page 40) 6 (standard) (see pages 31-39) 605118 1-1/8" A01 Cloverleaf7 (available for1-1/4"- 1-1/2")606114 1-1/4" A02 Straight 611612613618619625626722Concealed Shell Mortise CylindersConcealed shell cylinders are formortise locks using “Plug Only toShow” escutcheon trim.Type Length Cam Pins Keyway Finish1200 100 1" (6-pin std.) (see page 40) 5 (1" length only) (see pages 31-39) 606118 1-1/8" A01 Cloverleaf 6 (standard) 626114 1-1/4" A02 Straight138 1-3/8"112 1-1/2"7 (available only for1-1/4"- 1-1/2")LengthLength is measured from behind the cylinder head to theend of the cam.For cam illustrations and applications, see page 40.Key Systems.845078-3/14

ConventionalKey SystemsMortiseHotel Function CylindersGuest Key and all normal master keyshave limited rotation to retractlatchbolt only. Emergency Master Key(EMK) and display key turn 360° tooperate deadbolt as well.Brink Function CylindersThe change key turns in only onedirection while the master key turnsin both directions. While it wasdeveloped for the detention market,the cylinder can provide a creativesolution to other security needswhen used in conventional mortiselocks. 6-pin only. Integration of thesecylinders must be planned from theinception of a keying system.Cylinder for Obsolete Exit DeviceFor inside of obsolete Corbin ® 37261/2 and 3727 1/2 and Russwin ® 7361/2 and 737 1/2 only. Cam rotation islimited by steel pins on back of shell.Type Number RemarksStandardFlexible HeadConcealed Shell1001-114-A011101-118-A011201-114-A01Not available with D1, D2, L1, L2, 752, 852 or A Class keyways. Order with A91 cam to accept discontinued Russwin ®“G” type long EMK.Finishes: see Standard, Flexible Head and Concealed Shell Cylinder sections, page 8.Finishes: 605, 606, 611, 612, 613, 625, 626, 629, 630, 722Cylinders are 6-pin. Display andEmergency Master Keys are cuton 7-pin blanksApplication Number RemarksFolger Adam ® NS400 Series x LEK 1004-118-A02 ClockwiseFolger Adam NS400 Series x LEK 1005-118-A02 CounterclockwiseBrink “CKS” 1004-118-A05 ClockwiseBrink “CKS” 1005-118-A05 Counterclockwise1006-118-A02 (6-pin only)Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630, 722Thumbturn CylindersClassroom function cylinders have apin to block cam rotation in the lockingdirection. The pin may be installed oneither side of the cam, depending onthe hand of the door.Suffix cam number to basic cylinder number.Example: 1300-118-A03Function Length Basic NumberStandardClassroomA02(147F77)Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630, 722A03(111F55)A93(281F27)1" 1300-100- • • N/A1-1/8" 1300-118- • • •1-1/4" 1300-114- • • N/A1-3/8" 1300-138- • • N/A1" 1303-100- N/A • N/A1-1/8" 1303-118- N/A • N/A1-1/4" 1303-114- N/A • N/A1-3/8" 1303-138- N/A • N/ADummy CylindersNumberLength1400-118 1-1/8"1400-114 1-1/4"These cylinders may be used to fill an openingleft when mortise cylinder operation is nolonger desired.1400-138 1-3/8"Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630Key Systems.945078-3/14

ConventionalComponent (Key-in-Lever/Knob)Key SystemsComponent CylindersFinishes 606, 6262000-031, 033, 034 or 037 2000-038 2000-052 2000-044 2000-051Type Tailpiece SeriesLever(Plug diameter)Knob(Plug diameter)Tailpiece Part Number(Length) 6-PinTailpiece Part Number(Length) 7-Pin2000031 CL3100 Lever Trim (.509") 778F778 (.692") 778F768 (.536")CL3300, CL3500, CL3800, CL3600 (June033(.509") 622F308 (.950") 682F298 (.794")2000 and after) Lever Trim - A6/N6/PR6033H G1055 ED Trim (Horizontal Tailpiece) (.509") 622F308 (.950") 682F298 (.794")034CL3400 (Lockset Series Obsolete)CL3600 (Prior to June 2000), A5/N5(.509") 622F298 (1.106") 622F308 (.950")037CL3700 (.509")CK4700 (.509")682F298 (.794")NA038 CL3800 (Obsolete 1993-1997 model) (.509") 596F898 (1.056") NA039 CL3900 (.509") 680F608 (1.700") NA039L CL3900 (2", 2-1/4" Thick Doors) (.509") 681F068 (1.950") NA044 CK4400 (.509") NA Separately NA051 B2/G2/G3 ED Trim (.552") 489F028 (.890") NA052 UT5200/CK4200 (.552") (.552") No Tailpiece NANote #1= For 7-pin version, suffix -7 i.e. 2000-033-72001-052 2001-044 2001-066Type Tailpiece Series2001Lever(Plugdiameter)Knob(Plugdiameter)Tailpiece PartNumber(Length) 6-PinTailpiece PartNumber(Length) 7-PinRemarks031 CL3129 (.509") 775F958 (.808") 775F968 (.652") Use 2001-031-E8 for EMK Blank034CL3329/CL3629CL3429 (Lockset Series Obsolete)(.509") 585F338 (1.046") 585F358 (.890") Use 2001-034-E8 for EMK Blank044 CK4429 (Straight Tailpiece) (.509") 564F508 (.764") NA Use 2001-044-E4 for EMK Blank052 CK4229 (.552") (.552") No Tailpiece NA Use 2001-052-E4 for EMK Blank066 CK4429 (Twisted Tailpiece) (.509") 574F128 (.835") NA Use 2001-066-E4 for EMK BlankNote #1= For 7-pin version, suffix -7, i.e. 2000-033-7Note #2= 2003-044 used for CK4455 & CK4482 prior to August 1993Type Tailpiece SeriesLever (Plugdiameter)Knob (Plugdiameter)Tailpiece PartNumber(Length) 6-PinTailpiece PartNumber(Length) 7-PinRemarks2100-0522100 052Ronde andContinental Knob(Obsolete)(.552") No Tailpiece NAFinishes 605, 606,611, 612, 613, 625,626Key Systems.1045078-3/14

ConventionalKey SystemsComponent (Key-in-Lever/Knob)2200-001 2200-002 2200-008 2200-076 2200-054 2200-003Cylinders for Other Manufacturer’s Products - 6-pinType Tailpiece Series2200Alarm Lock DL2500 SeriesArrow ® H Series Knobs and LeversLever (Plugdiameter)Knob (Plugdiameter)Tailpiece Part Number(Length)TailpieceOrientation001-A21 Arrow Q Series Levers(.552") (.552") 444F748 (.813") VerticalSargent ® 10 Line (Enlarge Lever Hole)Schlage ® D Series Levers001-A22 Schlage AL and ND Series Levers (.552") 461F108 (1.078") Vertical002-A21 Schlage D Series Knobs (.552") 444F748 (.813") Horizontal002-A22 Schlage A Series Knobs (PLY, etc.) (.552") 461F108 (1.078") Horizontal002-A23 Schlage A Series Knobs (ORB, only) (.552") 520F358 (1.328") Horizontal003-A24 Lockwood ® H Series Knobs (Enlarge Knob Hole) (.552") 444F748 (.813") Vertical008 Sargent 7,8,9 Line (Enlarge Knob Hole) (.552") NA054 Yale ® 5400, 6200 Knobs Only (Enlarge Knob Hole) (.552") NA076 Sargent 7600 Integralock (Enlarge Knob Hole) (.552") NACylinders with Other Manufacturer’s Keyways - 6-pinTypeTailpiece /KeywaySeries Lever (Plug diameter) Knob (Plug diameter) Tailpiece Part Number Remarks031-C CL3100 (.509") 778F788 (.710") Schlage C Keyway031-LA CL3100 (.509") 778F788 (.710") Schlage LA Keyway2400033-C033-LA034-C034-LACL3300/CL3600 (June 2000 and after)ED8200/ED8400CL3300/CL3600 (June 2000 and after)ED8200/ED8400CL3400 (Lockset Series Obsolete)CL3600 (Prior to June 2000)CL3400 (Lockset Series Obsolete)CL3600 (Prior to June 2000)(.509") 622F328 (1.106") Schlage C Keyway(.509") 622F328 (1.106") Sargent LA Keyway(.509") 682F398 (0.950") Schlage C Keyway(.509") 682F398 (0.950") Sargent LA Keyway037-CCL3700 (.509")CK4700 (.509")685F098 (0.794") Schlage C Keyway039-C CL3900 (.509") 616F208 (1.700") Schlage C Keyway039-LA CL3900 (.509") 616F208 (1.700") Sargent LA Keyway45078-3/14Key Systems.11

ConventionalKey SystemsComponent (Key-in-Lever/Knob/Dead Bolt)Cylinders for Other Manufacturers' Products (.552" Plug Diameter) - 6-pinType Tailpiece SeriesPlugDiameterTailpiece Part Number(Length)Remarks4200002-A47003-A47Adams Rite ®4025 PullAdams Rite4025 Pull(.552") 146F788 (0.968") Cylinder Only(.552") 146F788 (0.968")Cylinder andHousing4200-003-A474200-002-A47DL2200/DL3200 Deadbolts Cylinder (.509 Plug Diameter)Cylinder Type6-Pin7-Pin1-3/8" or 1-3/4" (Standard) 2" or 2-1/4"FunctionCylinder Tailpiece Cylinder Tailpiece11, 13, 17 4400-134-A51 753F768 4400-134-A51 753F76812 4400-134-A52 753F778 4400-214-A52 753F78811, 13, 17 4400-134-A51-7 753F768 4400-134-A51-7 753F76812 4400-134-A52-7 753F778 4400-214-A52-7 753F788Key Systems.1245078-3/14

ConventionalKey SystemsRimRim CylindersFor use with exit devices and exit device trim.Type Tailpiece Length Pins Keyway Finish3000058 5/8" 955 and 959 Trims138 1-3/8" M61 & M62 option for ED8200 andobsolete ED9200 exit device alarms200 2" (std. door)200N 2" ED4000/ED5000 Night Latch Function200V 2" vertical tailpiece312 3-1/2" (thick door)312V 3-1/2" vertical tailpieceTailpiece Orientationstd. = HorizontalV = Vertical6 (standard)7(see pages 31-39)605606611612613622625626629630722Rim ThumbturnType Tailpiece Length Pins Keyway Finish3300138 1-3/8"200 2" (std. door)N/AN/A60560661161261362262562662963072245078-3/14Key Systems.13

Interchangeable CoreKey SystemsFast changeover - new security in seconds!Options:• 7-Pin• VKC (Visual Key Control)• CKC (Concealed Key Control)• Construction Master Keying• Restricted/Protected Keyways• PyramidInterchangeable CoreAdvantagesRekeying can be done by non-technicalpersonnel without removing hardwarefrom the door. When used systemwide,IC provides tremendous rekeyingconvenience.When planned from the inception of asystem, IC cylinders can be integrated withconventional cylinders.ApplicationsIC is recommended for virtually all types ofkeying systems, such as office buildings,hotels, schools, hospitals and universities.When used in exit devices and otherinstallations which are labor intensive torekey, IC saves time and money over thelife of the building.OperationsAll operating keys (change, master, grandmaster) operate the lock normally. Torekey, use the special control key. Thecontrol key operates at a separate shearline in certain chambers within the core.Only the control key is required to removeand install a core.Cores6-pin standard; 7-pin, security and Pyramidoptional. Two nickel silver change keysfurnished standard per core. Control keysonly furnished when ordered.Key ControlCorbin Russwin cores are availablewith protected and restricted keyways,patented keyways, security and Pyramidto deter unauthorized key duplication.No orders for patented protected keys,security or Pyramid keys will be shippedfor a keying system without a letter ofauthorization from the end user.Construction KeyingCorbin Russwin recommends temporaryconstruction cores for greater security.Special construction master keying isalso available, when planned from theinception of the keying system. See page 7for details.Core MarkingConcealed Key Control (CKC) is availablefor all Corbin Russwin cores. Visual KeyControl (VKC) is available for conventionalcores, but not for security or Pyramidcores.Ordering IC Locksets and Exit DevicesFor specific product availability and QuickCodes for cylinder options, see “How toOrder” in each catalog section.Key Systems.1445078-3/14

Interchangeable CoreKey SystemsHow to OrderInterchangeable Core Mortise10 8 0 – 114 – A01 – 6 – L4 – x Finish x OptionCore Function Length Cam Pins Keyway Finish3 Pyramid4 SFIC HousingOnly (No Core)8 Standard9 Security(6-Pin only)7 LFIC Housingonly (no core)0 Standard1 Uses - E1suffixfor EMK blankHotel 1-3/8"with A01 camonly.7 Pyramid Security114 1-1/4"138 1-3/8"112 1-1/2"134 1-3/4"200 2"214 2-1/4"(see page 40)A01 CloverleafA02 StraightA03 Adams Rite ® MS andDL3000 DeadlockA04 DL4000A05 Adams Rite 4070A06 Schlage ® CloverleafA07 DL4100A62 MR Straight / 900 SeriesMullionA92 Exit GripTrim 01 & 02A93 Obsolete deadlocks:Corbin ® 610 Series andRusswin ® 1403 Series6 (standard)7 (Not available for1-1/4", 1-3/8"LFIC and 1-1/4"SFIC housings)(seepages31-39)605606611612613613E622625626629630722TemporaryConstruction CoreCT6 6-pin LFICCT7 7-pin LFICCT6D 6-pin LFICDisposableCT7D 7-pin LFICDisposableCTP Pyramid LFICCTPD Pyramid LFICDisposableCT6SD 6-pin SFICDisposableCT7SD 7-pin SFICDisposableInterchangeableCore Rim30 8 0 – 178 – 6 – L4 x Finish x OptionCore Function Tailpiece Length Pins Keyway FinishTemporaryConstruction Core3 Pyramid4 SFIC Housing Only (NoCore)8 Standard9 Security (6-Pin only)7 Housing only (no core)0 Standard7 Pyramid Security058 5/8"114 1-1/4" M61 & M62option for ED8200and obsolete ED9200 exitdevice alarms178 1-7/8" (std. door)178V 1-7/8" verticaltailpiece318 3-1/8" (thick door)Tailpiece Orientationstd HorizontalV Vertical (Not Available for114 length)6 (standard)7(see pages31-39)605606611612613622625626629630722CT6 6-pin LFICCT7 7-pin LFICCT6D 6-pin LFICDisposableCT7D 7-pin LFICDisposableCTP Pyramid LFICCTPD Pyramid LFICDisposableCT6SD 6-pin SFICDisposableCT7SD 7-pin SFICDisposableKey Systems.1545078-3/14

Security Cylinders (Inactive - For Existing Systems only)Key SystemsOtherSecurity Rim3 0 1 0 – 200 – 6 – L4 x Finish x OptionMechanism Function Tailpiece Length Pins Keyway Finish UncombinatedStandardInterchangeable Core1 Standard9 IC0 Standard2 Blockout(no IC)138For 3010 Only1-3/8" M61& M62 114For IC1-1/4" M61 & M626-pinonlyoption for ED8200 option for ED8200 andand obsoleteobsolete ED9200 exitED9200 exit device device alarmsalarms200 2" (Std. door) 178 1-7/8" (Std. door200V 2" vertical tailpiece178V 1-7/8" vertical tailpiece312 3-1/2" (thick door) 318 3-1/8" (thick door)(see pages28-36)605606611612613613E622625626629630UC312V 3-1/2" verticaltailpieceSecurity Cores OnlyDescription Core Number Remarks EMK BlankStandard 8010 N/AFor 1091 8010 EMK Set to hotel mortise EMK -E1 suffixFor CK4229 8011-042 Hotel indicator pin -E4 suffixSpecify Keyway. Available uncombinated, except 8010EMK.Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 690Key-in-Knob/Key-in-LeverDL2200/DL3200 Deadbolts CylinderFunctionLocksetCylinder NumberCL3100 2010-031CL3300, CL3500, CL3800, CL3600 Series (June 2000 and after) 2010-033G1055 exit device knob trims 2010-033HCL3300, CL3600 Series (Prior to June 2000) 2010-034CL3800 Series (obsolete 1993-1997 model) 2010-038CL3900 Series 2010-039CL3900 Series (2", 2-1/4" Thick Door) 2010-039LB2, G2 Exit Device Knob Trim 2010-051CK4200 and UT5200 Series 2010-052CK4229 Hotel Function 2011-052Specify Keyway. Available uncombinated.Use -E4 suffix for EMK blank. Finishes: 606, 6261-3/8" or 1-3/4" (Standard) 2" or 2-1/4"Cylinder Tailpiece Cylinder Tailpiece11, 13, 17 4410-134-A51 753F768 4410-134-A51 753F76812 4410-134-A52 753F778 4410-214-A52 753F788Other Manufacturers’ProductsVertical TailpieceHorizontal TailpieceAlarm Lock DL2500 SeriesArrow ® H Series Knobs & LeversArrow Q Series Levers2210-001-A212210-001-A212210-001-A21Schlage D Series KnobsSchlage A Series Knobs (PLY, etc.)Schlage A Series Knobs (ORB, only)2210-002-A212210-002-A222210-002-A23Sargent 7, 8, 9 Line(enlarge knob hole)2210-008Sargent ® 10 line (Enlarge lever hole) 2210-001-A21 Available Uncombinated. Finishes: 606, 626Schlage ® D Series Levers2210-001-A21Schlage AL and ND Series Levers 2210-001-A22Lockwood H Series Knobs2210-003-A24(enlarge knob hole)Yale ® 5400, 6200 Knobs(enlarge knob hole)2210-054Key Systems.1845078-3/14

PyramidOperationKey SystemsKeys• Nickel silver• Key Bow Type 28• Ordering example: 7PIN-28-XXXXKeyway• Ordering example P6 Keyway:7PIN-28-XXXX-SPCXXFront SideBack SideKEY SETSYMBOLSide Pin CodeKeywayBack Side Stamping & Options• Key set (VKC1), standard – unless otherwise indicatedCONTROL• System registry number will be stamped on upperlevelkeys unless otherwise indicatedPIN• Concealed key control (CKC2) available on cylinders• Visual key control (VKC2 and VKC3) not available oncylinders. CKC3 also not available.SYSTEMREGISTRYNUMBERNote: Refer to Corbin Russwin’s general catalog andprice book for complete detailed information.Keyway SecurityPyramid keyways will be determined by the supervisor ofKey Systems Administration. Assignment will be basedon the overall system requirements and geographiclocation to provide maximum protection to the owner.For security reasons, the keyway profiles are not shown.Key Systems.2345078-3/14

PyramidKey SystemsMortiseMortise CylindersMortise Locks/DeadlocksMortise Locks/DeadlocksFor use with all Corbin Russwin ML2000,ML2000HS and ML2200 (discontinued)mortise locks. DL4000 & DL3000 SeriesDeadlocks.Mortise Exit DevicesFor use with ED7600 and ED6600 devices.ConventionalFixed Core(FC)Interchangeable Core(IC)TypeLengthCamFinish1020 - High Security Mortise1027 - Security Mortise1030 - High Security IC Mortise complete1037 - Security IC Mortise complete1070 - Housing only1020/1027 - Non-IC (Fixed Core)114 - 1-1/4" (32mm)112 - 1-1/2" (38mm)*See note #31030/1037/1070 IC114 - 1-1/4" (32mm)138 - 1-3/8" (35mm)112 - 1-1/2" (38mm134 - 1-3/4" (44mm)200 - 2" (51mm)214 - 2-1/4" (57mm)A01 - CloverleafA02 - StraightA03 - Adams Rite ® MSA04 - DL4000 SeriesA05 - Adams Rite ® 4070A06 - Schlage ® CloverleafA07 - DL4100A62 - 900 KRM StraightA92 - See note #1605 - Bright Brass606 - Satin Brass611 - Bright Bronze612 - Satin Bronze613 - Dark Oxidized SatinBronze - oil rubbed613E - Dark Oxidized SatinBronze - Equivalent618 - Bright Nickel Plated619 - Satin Nickel Plated622 - Flat Black Coated625 - Bright Chromium Plated626 - Satin Chromium Plated629 - Bright Stainless Steel630 - Satin Stainless Steel722 - Black oxidized bronze,oil rubbedA93 - See note #2Note #1 - Not available ICNote #2 - For obsolete Corbin ® 610 and Russwin ® 1403 series deadlocksNote #3 - For ML2000 applications with door thickness exceeding 2-1/2" up to 3" in thickness, use IC cylinders.How to Order ExamplesHigh Security Mortise Cylinder Ordered SeparatelyQuantity Keyset Cylinder Length Cam Finish Keyway50 AA1 1020 114 A01 605 P3A1Mortise Cylinder with a Pyramid Security Interchangeable CoreQuantity Keyset Cylinder Length Cam Finish Keyway50 AA1 1037 114 A01 605 P3A1Mortise Lock with a Pyramid Fixed Core High Security CylinderQuantity Keyset Series/Function Trim Finish Hand Pyramid Quick Code Keyway50 AA1 ML2051 LSA 626 RHR PHS (PS for Security version) P3A1Mortise Lock with a Pyramid Interchangeable Core High Security CylinderQuantity Keyset Series/Function Trim Finish Hand Pyramid Quick Code Keyway50 AA1 ML2051 LA 626 RHR PCHS (PCS for Security version) P3A1ExceptionsPyramid cylinders are not available for the following: ML2029, ML2029HS, ML2029VR, ED7600 - applications over 2-1/4" thick, ED6600 - applications over 1-3/4" thick.Key Systems.2445078-3/14

PyramidRimKey SystemsRim CylindersFor use with exit devices and exitdevice trims.ConventionalFixed Core(FC)Interchangeable Core(IC)TypeLengthFCAvailabilityICFinish3020 - High SecurityRim Cylinder3027 - SecurityRim Cylinder3030 - High Security ICRim Cylinder3037 - Security ICRim Cylinder3070 - Housing only058-5/8" (16mm) Tailpiece X X114 - 1-1/4" (32mm) M61 & M62 option for ED8200 and ED9200 exitdevice alarms138 - 1-3/8" (35mm) M61 & M62 option for ED8200 and ObsoleteED9200 exit device alarms178 - 1-7/8" (48mm) (Std. Door) X178V - 1-7/8" (48mm) vertical200 - 2" (51mm) X200N - 2" (51mm) ED4000/ED5000 Night Latch Function200V - 2" (51mm) vertical312 - 3-1/2" (89mm) XXXXXX605 - Bright Brass606 - Satin Brass611 - Bright Bronze612 - Satin Bronze613 - Dark Oxidized Satin Bronze -oil rubbed613E - Dark Oxidized SatinBronze - Equivalent618 - Bright Nickel Plated619 - Satin Nickel Plated622 - Flat Black Coated625 - Bright Chromium Plated626 - Satin Chromium Plated629 - Bright Stainless Steel630 - Satin Stainless Steel722 - Black oxidized bronze,oil rubbed312V - 3-1/2" (89mm) verticalX318 - 3-1/8" (79mm) XHow to Order ExamplesHigh Security Rim Cylinder Ordered SeparatelyQuantity Keyset Cylinder Length Finish Keyway50 AA1 3020 200 605 P3A1Rim Cylinder with a Pyramid Security Interchangeable CoreQuantity Keyset Cylinder Length Finish Keyway50 AA1 3037 178 605 P3A1Exit Device with a Pyramid Fixed Core High Security CylinderQuantity Keyset Series/Function Trim Finish Hand Pyramid Quick Code Keyway50 AA1 ED5200 L955 630 RHRPHS (PS for Securityversion)P3A1Exit Device with a Pyramid Interchangeable Core High Security CylinderQuantity Keyset Series/Function Trim Finish Hand Pyramid Quick Code Keyway50 AA1 ED5200 L955 630 RHRPCHS (PCS for Securityversion)P3A145078-3/14Key Systems.25

Key BlanksKey SystemsHow to OrderL4 – 6-Pin – 1 – 0Key Sections Length Bow Shape Bow Marking(see pages 31-40)Indicate5-, 6-, 7-pin1 Standard5 Large9 Security0 Coined Logo1 Plain2 DND3 US property DND9 Restricted DNDStandard BowsProtected andRestricted Keys10The standard bowfurnished for allnon-restricted keywaysunless otherwisespecified. The other sideis blank.Example: L4-6PIN-10.Large Bows11Blank both sides, foruse when more area isrequired for stamping,such as custom diestamps. Not for usewith restricted keyways.Example: L4-6PIN-11.12This bow enhanceskey control for nonrestrictedCorbinRusswin keyways. Otherside blank. Example:L4-6PIN-12.13For use only on U.S.Government projects.Example: L4-6PIN-13.10, 50 and 90 bowshapes are designatedas 19, 59 and 99 forprotected and restrictedkeyways. They arestamped this way onthe thumb side. Otherside blank.RESTRICTEDDO NOTDUPLICATEThis stamp is notavailable for keys whichare not protected andor restricted. Protectedkeyway keys will bestamped restricted.DO NOTDUPLICATE515253Blank both sides.Recommended forspecial die stampsor large amounts ofstamping, and forControl and EmergencyMaster Keys. Notavailable for 752, 852or A Class keyways.Example: L4-6PIN-51.Recommended for nonrestrictedkeys whichneed extra space forspecial stamping. Thisbow also enhanceskey control for otherCorbin Russwin keys.Not available for 752,852 or A Class keyways.Example: L4-6PIN-52.For use only on U.S.Government projects.Recommended for usewhen a large amountof stamping is required.Not available for 752,852 or A Class keyways.Example: L4-6PIN-53.Key Systems.2945078-3/14

Key BlanksHow to OrderKey SystemsSecurity Bows (Inactive - for Existing Systems Only)90Standard bow forsecurity keys. Example:L4-6PIN-90.91Blank both sides forsecurity keys whereextra stamping isrequired. Not for usewith restricted keyways.Example: L4-6PIN-91.92This bow enhanceskey control for nonrestrictedsecurity keys.Other side blank.Example: L4-6PIN-92.93For use only onsecurity keys for U.S.Government projects.Example: L4-6PIN-93.DO NOTDUPLICATEDO NOTDUPLICATEHotel Security Key BlanksStandard hotel function mortise cylinders 1001 and 1011 use 7-pin Emergency Key blanks. The 51 bow is suggested e.g., L4-7PIN-51.All other Corbin Russwin hotel function cylinders require keys with a special undercut tip. The four variations are shown below.-E1 Suffix-E8 Suffix-E4 Suffix-E5 SuffixFor interchangeable coremortise cylinder 1081(conventional) and 1091(security). Available 6-pin only.Examples: L4-6PIN-51-E1 orL4-6PIN-90-E1.For CL3329 and CL3629and obsolete CL3429 key-inleverlocksets, fixed core andIC. Available 6- and 7-pin.Example: L4-6PIN-51-E8.For CK4229 locksets, fixedcore and IC, conventionaland security. Also for CK4429.Available 5- or 6-pin.Examples: L4-6PIN-51-E4or L4-6PIN-90-E4.For obsolete 1429, 3333EM,4333EM and 5629 key-inknoblocksets. Available5- and 6-pin. Example:L4-6PIN-51-E5.Pyramid BowOrdering ExampleFront SideBack SideKEY SETSYMBOLPXXX - 7 - 28SYSTEMREGISTRYNUMBER28Standard bow furnished for all Pyramid keys.Key Sections(see page 43)Length7-pinBow ShapeKey Systems.3045078-3/14

KeywaysKeyway TypesKey SystemsMultiplex/Simplex KeywaysMultiplex keyways can be used together toexpand a keying system. A simplex keywayis independent, stands alone and cannotbe tied into any other keyway to expand akeying system.All/Multi-Section/Single Section KeysAll/Multi-section keys can be used on morethan one cylinder with different sections.For example: a key cut on the L41 multisectionkeyblank will pass cylinder in theL1, L2, L3 and L4 keyways. Single sectionkeys can be used with cylinders of thesame section. For example: a key cut onthe L4 single section keyblank will onlypass a cylinder in the L4 keyway.Active KeywaysKeyways which are available for newCorbin Russwin keying systems areconsidered active. In the case of newmaster key systems, the factory reservesthe right to select the keyway from arange of standard keyways, based onusage in a particular geographical area.Inactive KeywaysMany older Corbin Russwin keyways aredesignated inactive. No new systemsshall be established on these keyways.However, they continue to be available tosupport existing keying systems.Restricted KeywaysFor security reasons, these keyway profilesare not shown.Protected KeywaysKey Systems Administration reservesthe final decision as to which protectedkeyway family will be selected. A noticeof acceptance showing the facilitiesname, address and contact information isrequired before orders can be processedFor security reasons, these keyway profilesare not shown.Pyramid KeywaysPyramid keyways are only availablefor Pyramid cylinders and separatespecifications are used from conventionalCorbin Russwin keying systems. Newsystems for Pyramid require a Notice ofAcceptance document to be on file withKey Systems Administration. All ordersfor Pyramid must have a system specificRegistration Certificate attached and allproducts must ship directly to the enduser unless a quantity - specific Letter ofAuthorization accompanies the purchaseorder. For security reasons, these keywayprofiles are not shown.Bitting ClassesCorbin Russwin has several sets ofdimensional standards for bitting (cutting)keys. If the wrong specifications are usedwhen making keys on code machinesin the field, they will not operate inconjunction with factory supplied cylindersand keys. The bitting class is given for eachgroup of keyways. All bitting specs areavailable in the Corbin Russwin cylindermanual.L Series (Corbin Russwin)All-Section KeyL414 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bitting.Reverse of D Series.SecurityMulti-Section KeyCylinder Keyway andSingle Section KeyL12L34STOCKL1L2L3L4AvailableKey Systems.3145078-3/14

KeywaysZ and DH Class KeywaysKey SystemsD Series (Russwin ® )4 keyway multiplex system.Available 5-, 6- and 7-pin.DH Class bitting.Reverse of L Series.All-Section KeyMulti-Section KeyD12D41D34SecurityCylinder Keyway and SingleSection KeyAvailableD1D2D3D459 Series (Corbin ® )9 keywaymultiplex system.Available 5-, 6-and 7-pin.Z Class bitting.All-Section KeyMulti-Section Key59AB59AD59CDMulti-Section Key59A 59B 59C 59DSecurityCylinder Keyway andSingle Section KeyAvailable59A159A259B159B259C159C259D159D260H Series (Russwin)8 keywaymultiplex system.Available 5-, 6-and 7-pin.DH Class bitting.All-Section KeyMulti-Section KeyMulti-Section KeyH81H41H85H12 H34 H56 H78SecurityCylinder Keyway andSingle Section KeyAvailableH1H2H3H4H5H6H7H870 Series (Corbin)Simplex Keyway.Z Class bitting.Reverse of 60.SecurityAvailable70Key Systems.3245078-3/14

KeywaysKey SystemsRestricted62 Series (Restricted)Keyway profiles not shownfor security reasons.8 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bitting.SecurityAll-Section KeyMulti-Section KeyMulti-Section KeyCylinder Keyway andSingle Section Key62AD62AB62CD62A 62B 62AD 62C 62D62AB62CD62A1 62A2 62B1 62B2 62C1 62C2 62D1 62D262A 62B 62C 62D62A1 62A2 62B1 62B2 62C1 62C262D162D2AvailableHO81HO Series (Restricted)Keyway profiles not shownfor security reasons.8 keyway multiplex system.Available 5-, 6- and 7-pin.DH Class bitting.SecurityAll-Section KeyMulti-Section KeyMulti-Section KeyCylinder Keyway andSingle Section KeyHO41HO85HO12 HO34 HO81 HO56 HO78HO41HO85HO1 HO2 HO3 HO4 HO5 HO6 HO7 HO8HO12 HO34 HO56 HO78HO1 HO2 HO3 HO4 HO5 HO6 HO7 HO893AD93AB93CDAvailable93A 93B 93AD 93C 93D93AB93CD93A1 93A2 93B1 93B2 93C1 93C2 93D1 93D293A 93B 93C 93D93A1 93A2 93B1 93B2 93C1 93C239AD93D193D239AB39CD39A 39B 39AD 39C 39D39AB39CD39A1 39A2 39B1 39B2 39C1 39C2 39D1 39D239A 39B 39C 39D39A1 39A2 39B1 39B2 39C1 39C2F4139D1J4139D2F12F34J12J34F1F12F2F41F3F34F4J1J12J2J41J3J34J4F1F2F3F4J1J2J3J445078-3/14Key Systems.33

KeywaysKey Systems93 Series (Protected)Keyway profiles not shownfor security reasons.8 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bitting.SecurityAvailable39 Series (Protected)Keyway profiles not shownfor security reasons.8 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bitting.SecurityAvailableF Series (Protected)Keyway profiles not shownfor security reasons.4 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bittingSecurityCylinder Keyway andSingle Section Key39AB62AB62A1 62A2 62B1 62B2 62C1 62C2 62D1 62D262A 62B 62C 62DHO8162A1 62A2 62B1 62B2 62C1 62C2HO41HO85HO12 HO34 HO81 HO56 HO78HO41HO85HO1 HO2HO12HO3 HO4HO34HO5 HO81 HO6HO56HO7 HO8HO78HO41HO85HO1 62AD HO2 HO3 HO4 HO5 HO6 HO7 HO8HO12 HO34 HO56 HO7893ADAll-Section Key62AB62CDMulti-Section KeyHO193ABHO2 HO3 HO4 HO593CDHO6 HO7 HO862A 62B 62C 62D93A 93B 93AD 93C 93DMulti-Section Key62A1 62A2 62B1 62B2 62C1 93AB 62C2 62D1 62D2 93CDCylinder Keyway and 93A1 93A2 93B1 93B2 93C1 93AD 93C2 93D1 93D2Single Section Key93A 93B 93C 93D93AB93CD93A1 93A2 93B1 93B2 93C1 93C2 93D1 93D2HO8193A 93B 93C 93D39ADHO4193A1 93A2HO8593B1 93B2 93C1 93C2 93D1 93D2HO12 HO3439ABHO56 HO7839CD39A 39B 39AD 39C 39DAll-Section KeyHO1 HO2 HO3 HO4 HO5 39AB HO6 HO7 HO8 39CDMulti-Section Key 39A1 39A2 39B1 39B2 39C1 39AD 39C2 39D1 39D239A 39B 39C 39DMulti-Section Key39AB39CD93ADCylinder Keyway and 39A1 39A2 39B1 39B2 39C1 39C2 39D1 39D239A 39B 39CSingle Section Key93ABF41 93CDJ4139D62CD62D193A 93B F12 39A1 93C 39A2 F34 39B1 93D 39B2 J1239C139C2 J3439D1F41J4193A1 93A2 93B1 93B2 F1 93C1 F2F1293C2 F3 93D1 F4F3493D2 J1 J2J12J3J34J4All-Section KeyMulti-Section KeyF1 F2 F3F12F41F4F34J1 J2 J3J12J41J439ADF1F239CD39A 39B 39C 39DF3F4J1J2J362D239D2J34J4Available39A1 39A2 39B1 39B2 39C1 39C239D139D2J Series (Protected)Keyway profiles not shownfor security reasons.4 keyway multiplex system.Available 5-, 6- and 7-pin.Z Class bitting.F41All-Section KeyF12F34Multi-Section KeyF1Cylinder F2 Keyway and F3Single Section KeyF4J1J12J2J41J3J34J4SecurityAvailableKey Systems.3445078-3/14

KeywaysKey Systems57 Series8 keyway multiplex system.Available 5-, 6-, and 7-pin.X Class bitting.All-Section KeyMulti-Section Key57ABCCorbin ® X Class57ADReverses57A1 27B257A2 27B157B1 27A257B2 27A1Multi-Section KeyCyl. Keyway andSingle Section Key57A57B57C57DSecurity57A1 57B2 57B1 57B257C1 57C2 57D1 57D2Not AvailableSimplex Keyways6 independent keyways.Available 5-, 6- and 7-pin.X Class bitting.Security97 99 AR AL BR BLNot AvailableKey Systems.3545078-3/14

KeywaysKey SystemsCorbin ® X Class27 Series7 keyways total (5 active).Available 5-, 6- and 7-pin.X Class bitting.ReversesAll-Section KeyMulti-Section KeyMulti-Section Key02727A27AB27BSecurityNot Available27A127A227B127B257B257B157A257A1Cylinder Keyway andSingle Section Key2727A1 27A2 27B1 27B2Cylinder Keyway andSingle Section Key28 29Inactive.Not usedfor newsystems.67 Series7 keyways total (5 active).Available 5-, 6- and 7-pin.X Class bitting.Reverse of 77 Series.All-Section KeyMulti-Section KeyMulti-Section KeyCylinder Keyway andSingle Section Key06767A67AB67BSecurityNot Available67 67A1 67A2 67B1 67B2Cylinder Keywayand Single SectionKey68 69Inactive.Not usedfor newsystems.77 Series7 keyways total (5 active).Available 5-, 6- and 7-pin.X Class bitting.Reverse of 67 Series.All-Section KeyMulti-Section KeyMulti-Section Key07777A77AB77BSecurityNot AvailableCylinder Keyway andSingle Section Key77 77A1 77A2 77B1 77B2Cylinder Keywayand Single SectionKey78 79Inactive.Not usedfor newsystems.Key Systems.3645078-3/14

KeywaysKey SystemsRusswin ® Inactive981 Series3 keyway multiplex system.Available 5-, 6- and 7-pin.981 Class bitting.SecurityAll-Section KeyCylinder Keyway andSingle Section Key9819812982 983Not AvailableFormer 6-pin Designations 961 962 963Former 7-pin Designations 971 972 973N Series (Obverse)14 keyways total: N1- N14.Available 5-, 6- and 7-pin.N Class bitting.All-Section KeyMulti-Section KeyMulti-Section KeyN1x13MN1-3-9-12MN2-7-8-10MN1-12M N3-9M N7-10M N2-8MFormer DesignationsCylinder Keyway andSingle Section Key6-pin: 1N-14N5- and 7-pin: 1K-14KN1 N12 N3 N9 N7N10 N2 N8SecurityAll-Section KeyN1x13MSimplex Keywaynot entered byN1x13M.Cylinder Keyway andSingle Section KeyNot AvailableN4 N5* N6 N11* N13* N14*NOTE: Do not use these pairs in the same keying system witheach other: N1 with N13; N3 with N5; N7 with N11N Series (Reverse)14 keyways total: N15- N28.Available 5-, 6- and 7-pin.N Class bitting.Former Designations6-pin: 15N-28N5- and 7-pin: 15K-28KSecurityNot AvailableAll-Section KeyMulti-Section KeyMulti-Section KeyCylinder Keyway andSingle Section KeyAll-Section KeyCylinder Keyway andSingle Section KeyN15-17-23-26MN15x27MN15x27MN16-21-22-24MN15-26M N17-23M N21-24M N16-22MN15 N26 N17 N23 N21N24 N16 N22Simplex Keywaynot entered byN15x27M.N18 N19* N20 N25* N27* N28*NOTE: Do not use these pairs in the same keying system with each other:N15 with N27; N17 with N19; N21 with N2545078-3/14Key Systems.37

KeywaysKey SystemsRusswin ® Inactive852 Series2 keyway multiplex system.5-pin standard, 6-pin special.Available with 10 Seriesbows only.No hotel function cylinders.2852252 852Simplex Keyways5-pin only752 uses 752 Class bittingG uses 852 Class bittingAvailable with 10 Series bows only.No hotel function cylinders.752GSecurityNot AvailableA Series (Obverse)12 keyways: A1-A12.5-pin standard, 6-pin special.Available with 10 Seriesbows only.A Class bitting.No hotel function cylinders.All-Section KeyMulti-Section KeyMulti-Section KeyA1-12MA1-3-9-12MA3-9MA1x12MA4-7MA4-6-7-10MA6-10MFormer Designations5-pin: 1A-12A6-pin: 1Z-12ZSecurityNot AvailableCylinder Keyway andSingle Section KeyAll-Section KeyCylinder Keyway andSingle Section KeyA1 A12 A3 A9A1x12MA2* A5* A8 A11A4 A7 A6 A10* NOTE: Do not use thesepairs in the same keyingsystem with each other: A1with A2; A4 with A5.A Series (Reverse)12 keyways: A13-A24.5-pin standard, 6-pin special.Available with 10 Seriesbows only.A Class bitting.No hotel functioncylinders.Former Designations5-pin: 13A-24A6-pin: 13Z-24ZCylinder Keyway andSingle Section KeyA13 A14* A15 A16 A17* A18A19 A20 A21 A22 A23 A24Security* NOTE: Do not use these pairs in the samekeying system with each other: A13 with A14;A16 with A17.Not AvailableKey Systems.3845078-3/14

KeywaysKey SystemsPyramid (Patented)P3CP3CP3C1 P3C2 P3C3P3C1P3CP3C2 P3C3P3C4P3C4PyramidP3C SeriesKeyway profiles not shownfor security reasons.4 keyway multiplexMulti-Section KeyCylinder Keyway andSingle Section KeyP3C1P3C1P3CP3C2 P3C3 P3ABP3C4P3AP3BP3C2 P3C3 P3AB P3C4P3AB SeriesKeyway profiles not shownfor security reasons.4 keyway multiplexAll-Section KeyMulti-Section KeyCylinder Keyway andSingle Section KeyP3A1P3AP3A2 P3B1P3BP3B2P3ABP3A1P3AP3A2 P3B1P3BP3B2P3ABP3A1P3AP3A2 P3B1P3BP3B2P4EFP4EF SeriesKeyway profiles not shownfor security reasons.8 keyway multiplexP4AD SeriesKeyway profiles not shownfor security reasons.8 keyway multiplexP5AD SeriesKeyway profiles not shownfor security reasons.8 keyway multiplexAll-Section KeyMulti-Section KeyP3A1P4EP3A2 P3B1P4EFP3B2P4EP4FP4FCylinder Keyway andSingle Section KeyP4E1P4E1P4E2P4E P4E2P4E3P4EFP4E4P4E3 P4EF P4E4P4F1P4F1P4F2P4F P4F2P4F3P4F3P4F4P4F4P5ADP4EP4FAll-Section Key P4E1 P4E2 P4E3 P5ABP4E4P4F1 P4AD P4F2 P4F3P5CDP4F4Multi-Section KeyP5A P4AB P5BP4ADP5C P4CD P5DMulti-Section Key P4E1 P4E2 P4E3 P4E4 P4F1 P4F2 P4F3 P4F4P4A P4B P4C P4DCylinder Keyway andP4ABP4CDP5A1 P5A2 P5B1 P5B2 P5C1 P5C2 P5D1 P5D2Single Section KeyP4ADP4A1P4AP4A2 P4B1P4BP4B2 P4C1P4CP4C2 P4D1P4DP4D2P4ABP4CDP4ADP4A1 P4A2 P4B1 P4B2 P4C1 P4C2 P4D1 P4D2P4A P4B P4C P4DP5ADAll-Section KeyP4ABP4CDMulti-Section Key P4A1P4A P4A2 P4B1P5ABP4B P4B2 P4C1P4C P4C2 P4D1P5CDP4DP4D2Multi-Section KeyP5A P5B P5C P5DCylinder Keyway and P4A1 P4A2 P4B1 P4B2 P4C1 P4C2 P4D1 P4D2Single Section KeyP5A1 P5A2 P5B1 P5B2 P5C1 P5C2 P5D1 P5D2P6AD SeriesKeyway profiles not shownfor security reasons.8 keyway multiplexAll-Section KeyMulti-Section KeyMulti-Section KeyCylinder Keyway andSingle Section KeyP6ADP6ABP6CDP6A P6B P6C P6DP6A1 P6A2 P6B1 P6B2 P6C1 P6C2 P6D1 P6D2*Note: Each P6 keyway will have its own unique side pin code locations to be assigned by Key Systems Administration. The side pin code is not availablewith the other Pyramid keyway families.P6ADKey Systems.39P6ABP6CD45078-3/14

Mortise Cylinder CamsKey SystemsLockset ApplicationsCams for current products or modelsType Part Number Model/DescriptionA01Reg.IC756F50Corbin RusswinArrow ® ,Marks 5000, PDQSteel case mortise locks except classroom and institutional privacy functions. Deadboltfunctions of green cast iron case mortise locks. NOT for master ring mortise cylinders.All mortise functions using Cloverleaf cam.A02Reg.IC756F51Corbin RusswinBaldwinR. R. BrinkMarksSteel case mortise lock classroom (55), inside of vestibule (42) and institutional privacy(69) functions. Most exit device trims. NOT for master ring mortise cylinders.All mortise locks.All except CKS.7000, 9000 and most brands of older black cast iron locks.A03Reg.IC756F52Corbin RusswinAdams Rite ®LoriDL3000 Series Cylindrical Deadlocks only.1800 Series, 4015 Deadlocks; 4500 and 4700 Series Latch Locks.4500, 4600 Series Deadlocks.A04Reg.IC756F53Corbin RusswinDL4000 Series Mortise Deadlocks only.A05Reg.IC756F54Adams RiteR. R. Brink4070 Series Deadlocks.“CKS” Control Key Switch.A06Reg.IC756F55Schlage ®L9000 Series (Cloverleaf only).A07Reg.IC756F56Corbin RusswinDL4100 Series DeadboltsA61Reg.IC562F40526F66Corbin RusswinMortise Series deadbolt function master ring locks manufactured since June 10, 1993(silver case). Adapt earlier (gold case) model to use this cam by installing thumbturn hub562F41-2.A62Reg.IC756F58Corbin RusswinCorbin RusswinDORMAMortise Series Master Ring classroom (55) function and inside of vestibule (42) functionmortise locksets.900 Series Mullion, WS700 Series Mullion (Both KRM)Mortise LocksA65 Reg. 025F72 Corbin RusswinMortise Series: required for master ring deadbolt functions manufactured beforeJune 10, 1993 (gold case) and for outside of current vestibule (42) function. Optionalfor current non-deadbolt functions except classroom (55) and inside of vestibule (42)function.A92Reg.IC756F62Corbin Russwin Concealed vertical rod exit device outside grip handle operators 01 and 02.Cams for obsolete Corbin Russwin products or modelsA63 121F01 Corbin Russwin Black cast iron case master ring mortise locks, except models with 1" throw deadbolt.A64 135F19 Corbin Russwin Black cast iron case master ring mortise locks with 1" throw deadbolt.A93Reg.IC281F27362F43Corbin Russwin610 and 1403 Series Cylindrical Deadlocks.Key Systems.4045078-3/14

Cylinder AccessoriesKey SystemsStandard Collars +Spring253F97 .150" (5/32")549F52 .219" (7/32") - Ring Only605F43 .350" (11/32")428F66 Packet: 549F52 + 253F97Solid, Recessed for Cylinder Head447F41* .031" (1/32"); total projection 1/4"700F53.090" (3/32") VR trim, doublecylinder 1-1/4"261F54.094" (3/32") x 2-1/4" O.D. for ED6000 withT5, T6, T9, T9M, T10, T10M, T11M trim270F15 .156" (5/32"); total projection 9/32"598F89* .156" (5/32"); total projection 9/32"447F42* .172" (11/64"); total projection 25/64"610FO1* .221" (7/32"); total projection 7/16"610F02* .289" (9/32"); total projection 1/2"654F07 .350" (11/32"); total projection 15/32"447F43* .375" (3/8"); total projection 19/32"609F36* .500" (1/2"); total projection 23/32"134F05.510" (1/2") for ED6800 x B5 or G6 andall ED7400, ED7800 with 1-1/8" cylinder654F08 .550" (9/16"); total projection 11/16".635" (5/8") for ED6800 x O1 or O2 with267F97 1-1/8" and ED6800 x B5 or G6 and allED7400, ED7800 with 1-1/4" cylinder609F37* .650" (21/32"); total projection 7/8"399F48.749" (3/4") for ED6800 x O1 or O2 with1-1/4" cylinder609F38* .850" (27/32"); total projection 1-1/16"Spacers for Flexible Head Cylinders370F29 .125" (1/8")370F31 .250" (1/4")252F82 .315" (5/16")Other Solid Collars416F39*.172" (11/64") security collar; totalprojection 13/32"303F25.312" (5/16") for 1-1/8" cylinder onaluminum doorMiscellaneous255F53 Rim cylinder, flush mount422F88 Rim cylinder, surface mount197F34 Wave washerCollars and Master Ring AdapterMaster Ring Collars +Solid, Recessed for Cylinder Head447F44* .031" (1/32"); total projection 1/4"261F55.094" (3/32") X 2-1/4" O.D. for ED6000 with T5,T6, T9, T9M, T10, T10M, T11M trim447F45* .172" (11/64"); total projection 25/64"447F46* .375" (3/8"); total projection 19/32"Spacers for Flexible Head Cylinders366F70.090" (3/32") tapered370F33 .094" (3/32")370F35 .281" (9/32")Miscellaneous255F54197F35Rim cylinder, flush mountWave washerMaster Ring AdapterFor installing standard diameter mortisecylinder in master ring lockset.Specify 522F93-2.Order cam separately. See page 40.* Number includes wave washer in packet+ Refer to corresponding parts and servicemanuals for correct cylinder collar applicationsand selection guideKey Systems.4145078-3/14

Cylinder AccessoriesKey SystemsPyramid CollarsCollars• 1-3/4" (44mm) thick door. For otherdoor thicknesses and trimconsiderations, contact Corbin RusswinTechnical Product Support.• Mortise Cylinders – 1-1/4" (32mm) lengthSpring Solid Surface Mount605F43(.350)447F41(.030)700F53(.090)270F15(.156)598F89(.156)447F42(.172)610F02(.289)447F43(.375)654F07(.350)267F97(.635)422F88(.000)Mortise CylinderHigh Security Separately (1020, 1030)XXSecurity Separately (1027, 1037)XMortise LockSingle CylinderSectionalXN EscutcheonXP EscutcheonXM EscutcheonXL & R EscutcheonXT Escutcheon (no collar required)Double CylinderSectionalXN EscutcheonXP EscutcheonXM EscutcheonXL & R EscutcheonXT EscutcheonXV EscutcheonXAuxiliary LocksDL4011, 4013, 4017XDL4012XRim CylinderHigh Security Separately (3020, 3030)XSecurity Separately (3027, 3037)XExit DevicesED4000-5000 Series700 Trim, F2, F3, T13, P9 XK1X700M Trim, F2M, F3M, T13MX900 Trim XCylinder DoggingXED6000 SeriesN3, G4, T3 XN4M, G5MXT7M, T9MXED7000 SeriesP4, P6, P7 XC4, 03, 05 XT11XED8000 SeriesKOXF1, P1, P2 (no collar required)Key Systems.4245078-3/14

Plug Diameters/Quick CodesKey SystemsCorbin Russwin Cylinder Plug DiametersWhen combinating Corbin Russwin cylinders, the diameter of the plug determines the set of bottom pin and build-up pin lengthsto use. The plug diameter is either .509" or .552". All Pyramid cylinders have a plug diameter of .496" and have their own pin kit.Current Corbin Russwin cylinder plug diameters are listed below by product series. Before 1983, however, all Corbin ® X Class cylindersused .509" diameter plugs.CL3200 Series Security Bolt .509" 1400/4300 Series (obsolete) Cylindrical .552"CL3300 CL3500, CL3800 Series Cylindrical .509" Pyramid Series All .496"CL3400 & CL3600 Series Cylindrical .509"CL3700 Series Cylindrical .509" Mortise Cylinders .552"CL3900 Series Cylindrical .509" Rim Cylinders .552"CK4200 CL3500, CL3800 Series Cylindrical .552" Interchangeable Cores .509"CK4400 Series Cylindrical .509" Padlocks .509"CK4700 Series Cylindrical .509" Competitors’ Key-in-Lever/Knob .552"UT5200 Series Unit Lock .552" Security, all cylinders .552"DL2100 Series Deadlock .509" Exit Devices, except IC .552"DL3000 Series Deadlock .552" A6/N6/PR6 trim and obsolete .509"DL3100 Series Deadlock .509" NS/AS trim .509"Cylinder OptionsDescriptionQuick CodeCollar Options - Mortise and Rim Cylinders OnlyDescriptionQuick CodeIC 6-pin with temporary construction coreCT6Collar packet (549F52 + 253F97)428F66IC 6-pin with temporary construction core (Red)CT6R Rim collar, flush mount255F53IC 6-pin with temporary construction core (Blue)CT6BRim collar, flush mount (master ring)255F54IC 6-pin with temporary construction core (Green)CT6GRim collar, surface mount (standard for rim cylinders)422F88IC 6-pin with disposable temporary coreCT6DIC 6-pin with SFIC disposable temporary core 1 (Mortise) CT6SD 1 Solid collar - .030447F41IC 6-pin with small format temporary disposable coreCTSDSolid collar - .031 (master ring)447F44IC 7-pin with temporary construction coreCT7Solid collar - .090 (VR trim only)700F53IC 7-pin with temporary construction core (Red)CT7RSolid collar - .094261F54IC 7-pin with temporary construction core (Blue)CT7B Solid collar - .094 (master ring)261F55IC 7-pin with temporary construction core (Green)CT7G Solid collar - .156270F15IC 7-pin with disposable temporary coreCT7D Solid collar - .156598F89IC 7-pin with SFIC disposable temporary core 1 (Mortise) CT7SD 1Solid collar - .172 (tapered security collar)416F39Pyramid with temporary construction coreCTPSolid collar - .172447F42Pyramid with disposable temporary coreCTPD Solid collar - .172 (master ring- standard for MR 118 cylinders)447F45SFIC 6-pin with less core (rim and mortise)CLS6 Solid collar - .221610F01SFIC 7-pin with less core (rim and mortise)CLS7 Solid collar - .289610F02Bump-resistant cylindersBRPSolid collar - .312303F25Keying OptionsSolid collar - .350654F07DescriptionQuick CodeSolid collar - .375447F430-bitted with 2 blank keys (except HS, CHS)(standard)Solid collar - .375 (master ring)447F46Keyed randomKRSolid collar - .500609F36Keyed alikeKAKeyed to specific bitting (specify bitting)KSSolid collar - .510134F05UncombinatedUCSolid collar - .550654F08Construction master keyedCMK Solid collar - .635267F97Solid collar - .650609F37Key Quantity Options2 change keys per cylinderSolid collar - .749399F47(standard) 2Other than 2 change keys per cylinderKY#Solid collar - .850609F38(i.e. customer requests 6 change keys per cylinder)(i.e., KY6) Spacer for flexible head cylinders - .125370F29No change keysKY0Spacer for flexible head cylinders - .250370F31Master keys (if required) 3Specify Qty.Control keys (if required) 3Specify Qty. Spacer for flexible head cylinders - .315252F82CMK keys (if required) 3Specify Qty. Spacer for flexible head master ring cylinders - .094370F33CMK control keys (if required) 3Specify Qty. Spacer for flexible head master ring cylinders - .281370F35SKD control keys (if required) 3Specify Qty. Spacer for flexible head master ring cylinders (tapered) - .090366F70Special purpose keys, i.e., ENG (if required) 3Specify Qty.1Corbin Russwin does not furnish permanent SFIC coresSpring collar - .150 (standard for 118 cylinders)253F972Keys shipped separately for security and Pyramid master keyed cylindersSpring collar - .219549F523Order as cut keysSpring collar - .350 (standard for 114 cylinders)605F4345078-3/14Key Systems.43

Quick Codes/How to OrderKey SystemsStamping Options*KeyBow OptionsDescriptionQuick CodeDescriptionQuick CodeKeys stamped with bitting number(standard)Corbin Russwin logo(standard)No keyset or bitting stamping on keysVKC0Plain both sidesKB11Keys only stamped with keyset (standard for HS, CHS,PS, PHS, PCS, PCHS)VKC1Do Not DuplicateUS Property Do Not DuplicateKB12KB13Keys stamped with keyset, cylinders stamped withkeyset on face of plug - not available for HS, CHS, PS,PHS, PCS, PCHSVKC2Protected Do Not Duplicate (only for protected keyways)Restricted Do Not Duplicate (only for restricted keyways)KB19KB19Keys stamped with bitting, cylinders stamped withkeyset on face of plug - not available for HS, CHS, PS,PHS, PCS, PCHSKeys stamped with keyset, cylinders stamped withkeyset in concealed locationKeys stamped with bitting, cylinders stamped withkeyset in concealed location- not available for HS, CHS,PS, PHS, PCS, PCHSLess Trade Mark (No Corbin Russwin logo on cylinders)*see page 6 for detailed descriptionsVKC3CKC2CKC3LTMPyramid (only for Pyramid keys)Large bow, plain both sidesLarge bow, Do Not DuplicateLarge bow, US Property Do Not DuplicateLarge bow, protected Do Not Duplicate(only for protected keyways)Large bow, Restricted Do Not Duplicate(only for restricted keyways)Security bow Corbin Russwin logo (only for security keys)KB28KB51KB52KB53KB19KB59KB90Security bow plain both sides (only for security keys)KB91Security bow, Do Not Duplicate (only for security keys)KB92Security bow, US Property Do Not Duplicate(only for security keys)KB93Security bow, protected Do Not Duplicate(only for security keys, protected keyways)KB99Security bow, Restricted Do Not Duplicate(only for security, restricted keyways)KB99How to Order CylindersMortise SeparatelyKeyset Cylinder Length Cam Pins Keyway FinishAA1 1000 118 A01 7 L4 626Rim SeparatelyKeyset Cylinder Length Pins Keyway FinishAA1 3000 058 7 L4 626Key-in-Lever/Knob SeparatelyKeyset Cylinder Lockset Series Pins Keyway FinishAA1 2000 033 7 L4 626IC Cores SeparatelyKeyset Cylinder Pins Keyway FinishAA1 8000 7 L4 626Key Systems.4445078-3/14

Service EquipmentKey SystemsPin KitsSingle System Pin KitsFor the end user with one Corbin Russwin System 70 keyingsystem to maintain. Each kit has all pins necessary to combinateinterchangeable core and master ring cylinders, as well asconventional cylinders (both .509" and .552" plug diameters).Furnished in a handsomely finished hardwood case withcombinating instructions on the inside of the lid. Includes keygauge, tweezers and both diameter plug followers.PK-70-ZDHFor pinning all types of cylinders (except security) with Z Classkeyways: 59, D, H and L Series, plus 60, 70 and restricted/protected keyways using System 70 depths (1-6).PK-70-XFor pinning all types of cylinders with X Class keyways: 27, 57,67 and 77 Series, plus AR, BR, BL, 97 and 99 using System 70depths (1-6).PK-70-NFor pinning all types of cylinders with N Class keyways: N1-N28using System 70 depths (1-6).Security Pin KitPK-70-HSFor security cylinders, including interchangeable core, Brinkand blockout function. Furnished in a handsomely finishedhardwood case with combinating instructions on the inside ofthe lid. Includes tweezers.Deluxe Pin KitPK-1070Ideal for locksmiths and distributor service personnel who mustservice a variety of Corbin Russwin keying systems. Also for endusers with Pre-System 70 keying systems.Contains all pins required to combinate standard, IC and masterring cylinders. Accommodates System 70 and non-System70 for both plug diameters and all key classes. Furnished in areinforced steel case with combinating instructions on the insideof the lid. A separate, removable, two-sided chart contains pinlengths for all modern key classes. Includes tweezers and bothdiameter plug followers.PK-20-HSEach pin kit has all the pins necessary to combinate standardand interchangeable core Pyramid High Security cylinders.Includes tweezers, plug follower, key gauge and combinatinginstructions.PK-20-PSEach pin kit has all the pins necessary to combinate standardand interchangeable core Pyramid Security Cylinders.Includes tweezers, plug follower, key gauge and combinatinginstructions.Pyramid Sample Display CaseS-20-DCContains sample Master Keyed Cylinders and informationmaterials.PK-70-ZDHPK-70-XPK-70-NPK-70-HSPK-1070PK-20-HS45078-3/14Key Systems.45

Service EquipmentKey SystemsReplacement Pin for KitsFor a complete listing of all Cylinder Components, refer to Cylinder/Owner’s Manuals.How to Order Conventional PinsSuffix 3-digit length in thousandths of an inch to base number.Example: .160" bottom pin is 553F484-160.DescriptionSpecify quantity of vials (100 pins/vial):Bottom Pins (L Series)Master/Top/Build-up Pins(M Series)Spool Top Pins (J Series)Specify quantity of vials (1500 balls/vial):Number553F48-4 + length553F49-2 + length553F50-2 + lengthConstruction Balls 546F97-8• Pins are packaged in a secure, spill-proof plastic vial with hinged top.• 12 vials per master carton.How to Order Security PinsReplace the “x” in the part number with the pin's skew number.Bottom pins use skews L (1) and R (2).Master pins use skews L (1), R (2) and S (3).Example: #2 master pin with S skew is 407T334-097.DescriptionNumberSpecify quantity of pins (must be multiple of 20):Bottom Pin, #2407T4x4-242Bottom Pin, #3407T4x4-270Bottom Pin, #4407T4x4-298Bottom Pin, #5407T4x4-326Bottom Pin, #6407T4x4-354Master Pin, #2407T3x4-097Master Pin, #3407T3x4-125Master Pin, #4407T3x4-153Top Pin #1 (long) 407T43-4193Top Pin #2 (short) 407T43-4158How to Order Pyramid Security PinsSuffix 3-digit length in thousandths of an inch to base number.DescriptionSpecify quantity of vials (100 pins/vial):Bottom Pins (Nickel Silver)Master/Build-up Pins/Top(Brass)DescriptionSpecify quantity of vials (100 pins/vial):Bottom Pins (Stainless Steel)Master/Build-up Pins/Top(Stainless Steel)DescriptionSpecify quantity of vials (20 pins/vial):P6 Side PinNumber695F244 + length695F252 + lengthHow to Order Pyramid High Security PinsSuffix 3-digit length in thousandths of an inch to base number.Number695F247 + length695F257 + lengthHow to Order Pyramid Bump Resistant PinsDescriptionSpecify quantity of vials (100 pins/vial):Size ASize CHow to Order Pyramid P6 Side PinsNumber628F107142628F107236Number630F494TOP PIN (M)(J) Spool PinMASTER PIN (M)BOTTOM PIN (L)TOP PINMASTER PINBOTTOM PINTOP PINMASTER PINBOTTOM PINKey Systems.4645078-3/14

Service EquipmentReplacement Pin for KitsKey SystemsCylinder Tool Kit No. CT-93Kit No. CT-93 contains the following items (also available separately):CT-4 Follower for 509" diameter plugsCT-11 Key gauge for Corbin ® X and Z Class System 70 and pre-System 70CT-19 TweezersCT-21 Key gauge for Russwin ® N Class System 70 and pre-System 70CT-22 Key gauge for Russwin DH Class System 70 and pre-System 70CT-23 Key gauge for Russwin 981 and 852 ClassesCT-26 Waldes Tru-Arc pliers (see below for full description)CT-54 Follower for .552" diameter plugsPyramid ToolsCT-20 Pyramid plug follower (.495" diameter)CT-20K Key Gauge for PyramidOther ToolsCT-5 Pin Chamber ReamerCT-7 Pin Chamber Burring ToolCT-10Loading tool for CK4400 Series and IC cylinder shellsCylinder Installation Wrench No. CT-80CT-80 is for interchangeable core mortise cylinders. It is used to:• Install and remove Corbin Russwin interchangeable core mortisecylinder housing without marring cylinder scalp finish.• Test cam operation before fastening the mortise cylinder set screw.• Align the pins of the throw member before installing the core.CT-80Waldes Tru-Arc PliersNo. CT-25When rekeying or exchanging cylindersin CK4200 and UT5200 Series knobs,this tool is used to remove the large knobshank retaining ring to gain access to thecylinder.No. CT-26When rekeying CK4200 and UT5200Series cylinders, this tool is used to removethe plug retainer.No. CT-27When rekeying or exchanging cylindersin UT5200 Series Unit Lock lever handles,this tool removes and installs the cylinderretaining ring.45078-3/14Key Systems.47

Service EquipmentOther Cylinder PartsKey SystemsScrews438F41 -8Cam screw, mortise cylinder and RFC padlocks438F42-8 Cam screw, IC mortise cylinder488F08-8 Mortise cylinder set screw packet (1 screw), standard cylinder size488F10-8 Mortise cylinder set screw packet (1 screw), master ring021F68-8 Rim cylinder mounting screw, 2-9/32" long for 1-3/8" - 2-1/2" doors021F71-8 Rim cylinder mounting screw, 3-1/8" long for 2-3/4" - 3-1/2" doorsDisposable Core 10 Packs627F00-9 Corbin Russwin LFIC707F21-9 Corbin Russwin SFICTailpieces655F00-8 5/8" horizontal for rim cylinder 3000-058655F01-8 5/8" horizontal for IC rim cylinder 3080-058582F29-8 1-1/4" horizontal for IC rim cylinder 3080-114490F55-8 1-3/8" horizontal for rim cylinder 3000-138253F85-8 1-7/8" horizontal for IC rim cylinder 3080-178483F09-8 1-7/8" vertical for IC rim cylinder 3080-178V253F76-8 2" horizontal for rim cylinder 3000-200413F48-8 2" vertical for rim cylinder 3000-200V284F13-8 3-1/8" horizontal for IC rim cylinder 3080-318253F77-8 3-1/2" horizontal for rim cylinder 3000-312413F49-8 3-1/2" vertical for rim cylinder 3000-312V622F30-8 For 2000-033 & 2000-034-7 cylinders622F29-8 For 2000-034-6 cylinder682F29-8 For 2000-037 & 2000-033-7 cylinders596F89-8 For 2000-038 cylinder489F02-8 For 2000-051 cylinder680F60-8 For 2000-039 cylinder681F60-8 For 2000-039L cylinderRim Cylinder Back Plates253F75-8 For standard and Pyramid rim cylinders135F10-8 For master ring rim cylindersRetainers173F79-8 .020" thick for 2001 -051 cylinder368F91-8 .030" thick for rim, 2200, 2210 & 3000 Series cylinders488F92-8 .032" thick for CK4200 and 1400/4300 Series locks333F99-7 For CK4400 Series Locks, 4300 Series Cylinders, 8000 cores and Pyramid655F41-5 For 3080 IC rim cylinder680F64-5 Threaded cap for 2000-033, 034, 037, 039, Security & Pyramid KIL cylinders585F31-2 Cap pin for aboveSprings (Ordered in multiples of 100)585F32-7 For 2000-033, 034, 037, 039, Security & Pyramid KIL cap pin)172F21-7 IC Conventional & Security603F20-7 Fixed Core Conventional & Security026F75-7 Hotel Mortise blocking pin697F50-7 All Pyramid Cylinders314F98-7 For 2001-034 indicatorSpring Covers217F42-2 5-pin brass (Rim/Mortise/IC)217F44-2 6-pin brass (Rim/Mortise/IC/Pyramid IC)314F88-7 6-pin stainless (2000 Series Knob/Lever)217F43-2 7-pin brass (Rim/Mortise/IC/Pyramid Rim & Mortise)585F39-7 7-pin stainless (2000 Series Lever/Pyramid KIL/KIK)411F092Pyramid KIL/KIK for other manufacturers products (2200 Series)Padlock Parts362F15-3 Throw member for IC & RFC padlocks (A)793F592-4 Cylinder sleeve for RFC padlocks (B)438F41-8 Mounting screw for RFC padlocks (C)Key Systems.4845078-3/14

Policies and ProceduresKey SystemsProceduresCorbin Russwin keying systems utilize theStandard Key Coding System illustratedon the following pages. To ensure promptand accurate processing, purchase ordersshould be written using these key symbolsto describe each master keyed item.In addition to the key symbol, CorbinRusswin requires the following informationon the keying system for ALL orders:• End User (job) Name• City, State, Zip Code• Special key bows or key stamping• VKC/CKC requirements (see page 6)New Systems or New Branches ofExisting SystemsIndicate system expansion in terms ofestimated numbers of key combinations,not doors. All of this information isessential at the inception of a keyingsystem in order for Corbin Russwin toensure accommodation of the end user’spresent and future needs. Advise asfollows:• How many levels of keying?• Plan for a construction master key?• Any selective master keys, such as ENG?• How many changes for each master?• How many masters for each grandmaster? If mixing Corbin Russwincylinder types, indicate clearly whereeach type of cylinder will be used withinthe expansion parameters:• Which masters or grands havesecurity cylinders under them?• Which have interchangeable cores?• Which have master ring?• Which have conventional cylinders?Existing System Add-OnsFor prompt processing, orders mustinclude a positive identification for thekeying system in addition to the job name,city, state and zip code. Any ONE of thefollowing is positive ID:• Registry number stamped on any existingfactory master key• Previous factory order number togetherwith the year of that orderLetters of AuthorizationNo letter is needed when the items are tobe drop shipped directly to the end user.In all other cases, to preserve the securityof the end user’s keying system, CorbinRusswin requires a letter of authorizationon the end user’s letterhead to obtain thefollowing:• Bitting lists• Security blanks and cut keys• Master level cut keys• Protected key blanks, cylinders and plugs• Pyramid key blanks, cylinders, and plugsThe letter of authorization can be briefbut should include a specific description ofwhat is being authorized for release, and apositive key system identification.Pyramid Key Discard PolicyU.S. Utility Patent number 6,125,674protects Pyramid keys from unauthorizedduplication until the year 2018.It is essential that cut keys and key blankdistribution policies and procedures bemaintained and enforced for all Pyramidproducts.Authorized Pyramid DistributorsPyramid is a system-based product. Anauthorized distributor can stock Pyramidupon specific written authorization fromthe primary systems administrator of thefacility. Authorized distributors have theability to receive product, key product,cut keys and distribute the product to thefacility.Authorized Pyramid distributors whocarry inventory for a specific system mustprovide valid receipts and disbursementsof all Pyramid products, specifically keyblanks/cut keys. All Pyramid key blanksto be maintained in the possession of anauthorized Pyramid distributor must beaccounted for. Any defective, incorrectlycut or damaged Pyramid key blanksmust be retained in the distributor’spossession to be reviewed and collectedby a representative of ASSA ABLOY DoorSecurity Solutions.XYZ Corporation(Current Date)1 Main St.Anytown, USA 00001(203) 555-5555Corbin Russwin Architectural HardwareKey Systems Dept.We authorize Acme Distributors to obtain acopy of the bitting list for our keying systemGGMX5555. We also authorize them to orderthe quantities of master keys on our attachedpurchase order 1234AB.Sincerely,Gordon MorrisSecurity DirectorPyramid Primary SystemAdministratorsAny defective, incorrectly cut or damagedPyramid key blank must be destroyed.Pyramid Key WarrantyPyramid key blanks are covered by a5-year warranty as outlined in the currentlist price book.Pyramid Registration CertificatesFor each Pyramid system establishedthe designated owner’s representativewill receive a Pyramid Owner’s bindercontaining registration certificates specificto their system. Registrationcertificates will contain the facilityregistration number along with thefacility name and location and must besigned by an authorized representativefor the facility. Each order submitted forPyramid product must be accompaniedby a registration certificate. Additionalcertificates will be obtainable throughKey Systems Administration.Facility RegistrationFacility NameAddress #1Address #2City State ZipAuthorized RepresentativeDistributorSamplePO#PrintSystem Registry + Zip Code+ Certificate Number45078-3/14Key Systems.49

How to Establish Key SystemsKey Systems2- and 3-Level SystemsTo Specify a Simple Master Key System(2 Levels of Keying)The master key symbol consists of TWOletters, such as AA. The change keynumbers are added to the master keyletters. The numbers come FIRST: 1AA,2AA, 3AA, etc.When locks are required which are notoperated by the master key or otherchange keys in the system, they arereferred to as “single keyed” and givensymbols SKD1, SKD2, etc. When allhigher levels of master keys are to bedisallowed, suffix (NMK) to the symbol ofthe key which is to operate. This means“not master keyed.” Cylinder 1AA(NMK)is operated by 1AA only. The AA master isblocked from operation.Master KeyAAChange Keys1AA2AA 3AA SKD1To Specify a Grand Master Key System(3 Levels of Keying)The grand master is assigned any ONEletter, such as A. The master keys underthis grand are assigned TWO letters, thefirst of which must be the same as thegrand: AA, AB, AC, etc. are all mastersunder grand A. Masters BA, BB, BC, etc.,are all under grand B. Caution: Do not usethe letters I, O or Q because of possibleconfusion with the numerals 1 and 0,respectively. Also do not use the letterX due to confusion with cross keying.Change key numbers come after theletters.For master keys beyond AZ, insert anumeral between the letters to designatewhich pass through the alphabet theyrepresent. A2A through A2Z representsthe second pass of masters under grandA. A3A through A3Z would be the third.Change keys under these masters have thenumbers suffixed in the usual way: A2A1,A2A50, etc.If the cylinder is to be operated by itschange key and nothing lower than thesingle lettered GMK, the change numberis added to the GMK symbol. This isillustrated by the example A1 in theschematic shown.When locks are required which are notoperated by ANY master keys or otherchange keys in the system, they arereferred to as “single keyed” and givensymbols SKD1, SKD2, etc.When all higher levels of master keys areto be disallowed, suffix (NMK) to thesymbol of the key which is to operate. Thismeans “not master keyed” and can beapplied to any level in the system. CylinderAA1 (NMK) is operated by AA1 only. TheAA master and A grand are blocked fromoperation. Cylinder AA (NMK) would beoperated by the AA master only. Grand Adoes not operate.Grand Master KeyAMaster KeyAAABChange KeysAA1AA2AA3AB1AB2 A1 SKD1Key Systems.5045078-3/14

How to Establish Key SystemsKey Systems4-Level SystemsTo Specify a Great Grand Master KeySystem (4 Levels of Keying)The great grand master key is assignedthe symbol GGM. The rest of the symbolsare the same as those in 3-level systems:The GMKs are assigned single letters, e.g.,A, B, C, D, etc. Caution: Never use X fora grand master key due to the confusionwhich will result with cross keying symbolspresented on page 52.Masters under each GMK are assigned twoletters, the first of which is the same as itsrespective grand master key. Change keynumbers come after the letters. Changesunder the grand (A1, B1, etc.) and mastersbeyond AZ are handled exactly as in the3-level system already described.Changes directly under a grand are alsohandled as illustrated in the 3-level system.For changes directly under the GGMwith no intermediate level masters, thechange number is added directly to GGMas shown by the example GGM1 in theschematic.When locks are required which are notoperated by ANY master keys or otherchange keys in the system, they arereferred to as “single keyed” and givensymbols SKD1, SKD2, etc.When all higher levels of master keys areto be disallowed, suffix (NMK) to thesymbol of the key which is to operate. Thismeans “not master keyed” and can beapplied to any level in the system. CylinderAA1 (NMK) is operated by AA1 only.The AA master, A grand and GGM areall blocked from operation. Cylinder AA(NMK) is operated by the AA master only.Grand A and the GGM do not operate.Cylinder A (NMK) would be operated bythe A grand only, without the GGM.Great Grand MasterGGMKeyGrand Master KeyABMaster KeyAAABBABBChange KeysAA1 AA2 AA3 AB1 AB2 A1 GGM1 BA1 BB1 BB2 B1SKD1Selective Master KeysIt is often useful in large keying systemsto issue a high level master key tomaintenance personnel which allowsaccess across all master and grand masterkey boundaries of a keying system. Aselective master key is usually very closeto the system's top master key, bothphysically and through its realm of access.Nevertheless, it must be blocked fromoperating in many areas.The most common names and symbols forselective master keys are:ENG Engineer’s keyATT Attendant’s keyJAN Janitor’s keyHKP Housekeeper’s keyGRD Guard’s keyMAIN MaintenanceAATo designate that a lock be operated bya selective master key, suffix the symbolin parentheses to the standard symbol.Example: AA1 (ENG). This must be addedevery time the selective key is to operateand left off whenever the selective key isNOT to operate. For instance, you maylay out a system in which key AA1 is tooperate two different offices. Inside oneof them is an electrical cabinet which mustbe accessible to maintenance personnelcarrying the ENGGGMAABkey. That lock must be specified as AA1(ENG) while the lock for the other officemust be specified as AA1. Change keysdirectly under the selective key, such asENG1, are operated by all higher levelkeys, such as GGM.I.ike cross keying, a selective master keyis a convenience feature which decreasesthe security of the cylinders it operates andlimits the expansion and flexibility of theoverall keying system.ENGBABBBAA1AA2AA3AB1AB2BA1BA2BB1BB2BB345078-3/14Key Systems.51

How to Establish Key SystemsKey SystemsConvenience May Reduce CylinderSecurity and Hinder System ExpansionWhenever two or more different keys suchas AA1 and AA2 are both required tooperate the same cylinder, the cylinder'ssecurity is reduced. This is called crosskeying. When the cross keying occursunder all the same higher level keys, suchas AA1 and AA2, it is known as controlledcross keying. When it combines keys underdifferent higher level keys, such as AA1and AB1, it is known as uncontrolled crosskeying.In addition to reducing the security ofthe cylinder, cross keying usually imposeslimits on the flexibility and expansion ofthe overall keying system. This is especiallytrue of uncontrolled cross keying. Forthese reasons, it is strongly recommendedto allow personnel to carry more than onekey. Cross keying should be discouragedwhenever possible. However, whencross keying is required, it is specified asfollows, and should be summarized at thebeginning of each order.Case #1Cylinder requires its own change key.The illustration depicts part of a smallmedical building where two doctors sharea common receptionist. The receptionistgets the AA3 key. Each doctor carries akey which operates only one office, butis also cross keyed into the entrance fromthe corridor.Determine the symbol of the change key(example: AA3). Then prefix the letter X(example: XAA3). Then list all keys whichare to operate in an “operated by . . .”phrase. Example: “XAA3 operated byAA1, AA2, AA and A”. Note that X is acylinder specification only. The keys forcylinder XAA3 are designated AA3.XAA3Case #2Cylinder does NOT requireits own change key. Thisillustration depicts a sectionof a floor in a dormitory.Each student's bedroom keyAA1 AA2AA3operates the hall door lock.There is no need to constructX1Xa key which operates onlythe hall door.In this case, place an X atboth the beginning and endof the symbol and a numberAA4 AA5AA6between them. Example:X1X operated by AA1 through AA6, AA and A.X1X, X2X, etc. Again, alwaysinclude the “operated by . . .” phrasewith a complete listing of key symbols tooperate.AA2AA1ReceptionistOffice 1 Office 2XAA3 operated by AA1, AA2, AA and A.Key Systems.5245078-3/14

NotesKey Systems45078-3/14Key Systems.53

In U.S.Corbin RusswinArchitectural Hardware225 Episcopal RoadBerlin, CT 06037Phone: 800-543-3658Fax: 800-447-6714www.corbinrusswin.comIn CanadaASSA ABLOY DoorSecurity Solutions Canada160 Four Valley DriveVaughan, OntarioCanada L4K 4T9Phone: 800-461-3007Fax: 905-738-2478www.assaabloy.caFor more information regarding Corbin Russwin Locksets,Exit Devices, Door Controls and Key Systems, contact yourauthorized Corbin Russwin Distributor or Sales Representative.Corbin Russwin and Design® is a registered trademark of Corbin Russwin, Inc., an ASSA ABLOY Group company. Other products’ brand names may be trademarks orregistered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under US copyright laws. All contents current attime of publication. Corbin Russwin, Inc., an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/orits materials. Copyright © 2001, 2014 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express writtenpermission of Corbin Russwin, Inc. is prohibited.45078-3/14

Key Systems - Corbin Russwin

Create successful ePaper yourself

Delete template?

Save as template?