0.02 % (NIOSH, 2016) 6.8 ML GAS/100 ML WATER @ 0 °C INSOL IN HOT WATER; SLIGHTLY SOL IN ALKALI & ACID SLIGHTLY SOL IN WATER Slightly sol in alcohol Solubility in water, ml/100ml at 0 °C: 6.8 (reacts slowly) 0.02%
Synonyms
fluorine monoxide, oxyfluoride
Canonical SMILES
O(F)F
Description
The exact mass of the compound Oxygen difluoride is unknown and the complexity rating of the compound is unknown. The solubility of this chemical has been described as 0.02 % (niosh, 2016)6.8 ml gas/100 ml water @ 0 °cinsol in hot water; slightly sol in alkali & acidslightly sol in waterslightly sol in alcoholsolubility in water, ml/100ml at 0 °c: 6.8 (reacts slowly)0.02%. The United Nations designated GHS hazard class pictogram is Oxidizer;Corrosive;Acute Toxic, and the GHS signal word is DangerThe storage condition is unknown. Please store according to label instructions upon receipt of goods.Use and application categories indicated by third-party sources: Fire Hazards -> Corrosives, Reactive - 3rd degree. However, this does not mean our product can be used or applied in the same or a similar way.
Oxygen difluoride appears as a colorless poisonous gas with a strong peculiar odor. Highly toxic by inhalation. Corrosive to skin and eyes. Can explode on contact with water. Decomposes to toxic gaseous fluorine if heated to high temperature. Prolonged exposure of the containers to high heat may result in their violent rupturing and rocketing. Used as an oxidizer for propellants. COLOURLESS COMPRESSED GAS WITH CHARACTERISTIC ODOUR. Colorless, poisonous gas with a peculiar, foul odor. Colorless gas with a peculiar, foul odor. [Note: Shipped as a nonliquefied compressed gas.]
Color/Form
COLORLESS GAS; YELLOWISH-BROWN WHEN LIQUID Colorless gas [Note: Shipped as a nonliquefied compressed gas].
XLogP3
1.2
Boiling Point
-230 °F at 760 mm Hg (NIOSH, 2016) -144.75 °C -145 °C -230°F
Aggregated GHS information provided by 22 companies from 1 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; H270 (100%): May cause or intensify fire; oxidizer [Danger Oxidizing gases]; H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H330 (100%): Fatal if inhaled [Danger Acute toxicity, inhalation]; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown.
Vapor Pressure
greater than 1 atm (NIOSH, 2016) 760 MM HG @ -144.6 °C >1 atm
Pictograms
Oxidizer;Corrosive;Acute Toxic
Impurities
The gas had a purity range of 70 to 90%, the impurities being chiefly oxygen and nitrogen ... . ... 97% /pure/, with oxygen and carbon tetrafluoride being the main impurities.
Other CAS
7783-41-7
Wikipedia
Oxygen difluoride
Drug Warnings
Food and Environmental Agents: Effect on Breast-Feeding: Reported Sign or Symptom in Infant or Effect on Lactation: Fluorides: None. /from Table 7/
Biological Half Life
... Bone retains about 60% of iv-injected fluoride and that the half-time for this uptake is only about 13 min; both blood and extracellular fluid levels therefore decr rapidly. After ingestion of sodium fluoride, plasma fluoride levels show a much slower change with a half-life of about 3 hr ... . /Fluorides/
Use Classification
Fire Hazards -> Corrosives, Reactive - 3rd degree
Methods of Manufacturing
PREPARED BY PASSING FLUORINE SLOWLY THROUGH AN AQ NAOH SOLN.
Storage Conditions
IN GENERAL MATERIALS ... TOXIC AS STORED OR WHICH CAN DECOMP INTO TOXIC COMPONENTS ... SHOULD BE STORED IN COOL ... VENTILATED PLACE, OUT OF ... SUN, AWAY FROM ... FIRE HAZARD ... BE PERIODICALLY INSPECTED & MONITORED. INCOMPATIBLE MATERIALS SHOULD BE ISOLATED. Do not place combustibles and reducing agents ... /near fluorine monoxide/. Protect cylinder containers against physical damage. Do not use wood pallets.
Stability Shelf Life
GAS MAY BE KEPT OVER WATER UNCHANGED FOR A MONTH
Dates
Modify: 2023-07-20
Inquiry Online
* Please note that we will only send quotations to valid professional email addresses.
For inquiries regarding product suitability or assistance with placing orders, please don't hesitate to reach out to our expert technical support team. Alternatively, you can explore our informative guide pages for further assistance.