ELECTRICAL SYSTEM
The resistance of gear position sensor at
l
various position are as follows:
GEAR POSITION
First gear
Neutral
Second gear
Third gear
Fourth gear
Fifth gear
SWITCH ASSEMBLY STOP LAMP FRONT AND
REAR (BRAKE SWITCHES)
The DC output from ignition lock is connected
l
to the stop lamp through switch assembly stop
lamp front and rear. Stop lamp switch front is
fitted on the lever bracket assembly RH.
(Fig. 5.29)
Switch assembly stop lamp rear is fitted on the
l
frame below the battery assembly near the
mounting of the swing arm complete and
operated by the brake pedal. (Fig. 5.30)
Inspect the switch for continuity with the
l
pocket tester.
Pocket tester
SWITCH POSITION
APPLY BRAKE - ON
RELEASE - OFF
FUEL LEVEL INDICATOR
Fuel level indicator and fuel warning lamp are
l
provided in the digital speedometer.
Fuel level indicator and the warning lamp
l
works based on the variable resistance signal
received from the fuel sender unit. Fuel sender
unit resistance alters the resistance in
accordance with the amount of fuel available in
the fuel tank.
The fuel sender unit is fitted on the bottom of
l
the fuel tank. (Fig. 5.31)
RESISTANCE
0.3 kilo ohms
0.75 kilo ohms
1.5 kilo ohms
2.7 kilo ohms
5.6 kilo ohms
15 kilo ohms
G
BW
O
O
TVS APACHE RTR 200
Fig. 5.29
Fig. 5.30
Fig. 5.31
SERVICE MANUAL
5-13