ACR3 Hot Bonder Kit

ACR 3 Hot Bonder Kit with Heaters includes:

• ACR^®3 hot bonder unit
• One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone
• One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone
• One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone
• 10ft (3m) vacuum hoses (2 per zone)
• 10ft (3m) input power cord (1 per zone)
• 5ft (1.5m) heater output power cord (1 per zone)
• USB flash disk
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple receptacles (10 per zone)
• Vacuum bag feed-throughs (2 per zone)
• Extra printer ribbon and paper (1 per zone)
• DVD Training Video

Perform Cures Faster and Better

• Single or dual zone
• 8.4" (213mm) full-color touch-screen
• Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
• Universal voltage: 100-130VAC, 200-240VAC
• 30 amps output per heat zone
• 10 thermocouple sensors per zone
• Accepts J-type thermocouples
• Includes everything you need – Training DVD
• 

 Easy-To-Use Software on a Full-Color HD Touchscreen

• Quick 3-step programming: Stores up to 30 programs on hot bonder
• Easy-to-follow menu choices
• Quick and easy data entry: Uses simple drop-down menus and a familiar QWERTY keyboard interface
• Secure: Multiple levels of password protection
• Upgradeable

• Multi-task: Perform several operations at once
• Retains history of last 12 cures
• Customized post cure analysis: Data logging intervals 1 to 99 minutes
• Multiple language support: English, German, Russian, Chinese (Mandarin)
• Transfer and archive post cure data history to your PC
• Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft^® Excel^® and Word^®
• Transfer your programs quickly from one bonder to another
• Update your hot bonder easily with the latest software version for FREE.

 Fast and Simple Data Transfer with USB Drive (USB Flash Disk Included)

• Transfer and archive post cure data history to your PC
• Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft^® Excel^® and Word^®
• Transfer your programs quickly from one bonder to another
• Update your hot bonder easily with the latest software version for FREE.

General

• Single or dual zone
• 8.4" (213mm) touch-screen with easy-to-use interface
• USB port for data transfer (USB flash disk included)
• Input ground fault interrupter breaker protected
• Audible and visual alarms for high and low temperature / vacuum limits
• Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters

Power

• Universal Input Voltage: 100-130VAC, 200-240VAC
• MAINS supply voltage fluctuations up to ±10% of the nominal voltage
• Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
• Frequency: 50-60Hz
• 30 amps maximum per zone
• Output cord receptacle: NEMA L15-30R 

Vacuum

• Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
• Pressure: 28” Hg (13.8PSI)
• Ability to manually adjust pressure for each zone

Temperature Control

• Cure up to 1400^oF (760^oC)
• 10 thermocouple sensor inputs per zone
• Accepts J-type thermocouple connectors
• Accuracy: ±3°F (1.67°C)
• Monitors all thermocouples for alarms

Environment

• Intended for use in dry environments. Do not expose to wet spray.
• Altitude up to 6562ft (2000m)
• Storage temperature range: -4^oF to 140^oF (-20^oC to 60^oC)
• Operating temperature range: 41^oF to 104^oF (5 ^oC to 40^oC)
• Maximum relative humidity: 80% for temperatures up to 88^oF (31^oC) decreasing linearly to 50% relative to humidity at 104^oF (40^oC)
• Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)