Description

WINTER

WINTER

20, 10 L

WHERE APPLICABLE

Innovative development of the plant LMC Ltd. NPO Altermo - ultra-thin liquid thermal insulation "TERMION WINTER" allows you to work with the material in the winter at t ° to -30 ° C. This is a non-alternative version of the coating (from liquid heat insulators) for such weather conditions.

The material prevents freezing, the appearance of condensation and icing on the pipeline and the gas pipeline. It is used for warming walls, facades, balconies and balconies, attic rooms and cellars, basement floors, inter-panel seams, roofs and other metal structures.

The liquid thermal insulator "TERMION WINTER" can be compared to conventional enamels (by the method of use), but the micro-granules of glass ceramics with discharged air inside it make it an excellent thermal barrier, due to a very low thermal conductivity coefficient.

Thinner, for "TERMION WINTER", can be xylene or ortoxylol.

Liquid insulator "TERMION WINTER" has excellent adhesion properties, water resistance, resistance to alkaline environments and applicability to different types of bases.

"TERMION WINTER" on an organic basis, contains 80% microgranules of glass ceramics "3M" (France), ultraviolet filters and other rheological additives.

APPLICATION METHOD

  1. Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
  2. Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
  3. It is not recommended to apply TERMION WINTER to painted surfaces.
  4. For application, use a roller, brush or spray (airless).
Color of the film (basic)
White
Solvent
Orthoxylene, Xylene
Appearance of the coating
Matte, smooth, homogeneous
Density g / cm³
0,55
Hiding power, g / m2 (state standard 8784-75)
176
Calculated thermal conductivity W/m°С
0,0012
Heat dissipation W/m°С
3,9
Thermal resistance m2*C\W (at 1 mm)
1,0
Coefficient of vapor permeability Mg / m h PA
0,012
Adhesion coating (state standard 15140-78)
1 score
The flammability class (except for the modification of NG)
G 1
coatings to brick Mpa (State All-Union standard 28574-90)
2,00
coatings to concrete Mpa (State All-Union standard 28574-90)
1,28
coatings to steel Mpa (State All-Union standard 28574-90)
1,2
Storage (in tightly closed containers)
12 months
Actual consumption (single-layer coating) l / m²
0,8~1,0
Стоимость по запросу
Leave a request
Please fill in this form, and we will contact you within 10 minutes. Or call us by telephone: +7(499)755-84-90 / +7(800)222-03-56

    Questions and answers
    What is liquid insulation?

    It is a thermal insulation material that is applied to the surface with a brush, roller or brush as a liquid coating.

    Liquid heat-insulating paint (thermal paint) is a new generation coating produced at the LKM NPO Altermo, which allows to cope with such problems as: metal corrosion, freezing, fungal formations, used in almost all industries.

    What are the advantages of liquid insulation?
    • Economically. Due to its special composition, 1 mm replaces 50 mm of mineral wool, which means that it saves not only useful space, but also your funds.
    • Safely. Unlike the same cotton wool, liquid insulation is not a source of harmful dust and is produced taking into account environmental standards.
    • Effectively. The coating is wear-resistant, antifungal, environmentally friendly. And it is also impossible to steal it.
    • Versatile. Liquid thermal insulation is used to insulate facades, walls, floors, window slopes, various containers, pipes, to eliminate condensation, inside and outside, and in the heat and cold. It is in demand even in industry and heat power engineering.
    • Available. Liquid thermal insulation is just beginning to capture the construction market, and our company is one of the first to provide an opportunity to buy in Moscow and not only this unique energy-saving coating.
    Where can liquid insulation be applied?

    Ultrathin liquid thermal insulation TERMION® is highly effective in thermal insulation:

    • Building façades, roofs, interior walls, window jambs, concrete floors, balconies and attics
    • Hot and cold water pipelines
    • Steam pipes, air ducts for conditioning and cooling systems
    • Marine vessels (boats, yachts)
    • Different reservoirs (oil tanks, tank vessels, trailers, containers, refrigerators, etc.)
    • It is used to eliminate condensation on cold water supply pipes and to reduce heat loss in heating systems.
    Contacts
    8 (800) 222-03-56
    Toll-free in Russia
    +7 (499) 755-84-90
    Sales department
    8 (929) 916-77-67
    Director of Sales
    gin@pk-altermo.ru
    For cooperation
    25A, 1 May str., Krasnozavodsk, Moscow Region, Russia

    Additional information

    Фасовка

    20, 10 L

    en_USEnglish