New addition to the lab! I bought Giovanni’s book because it’s really epic. You can find (among others) a freely downloadable, high-quality ebook version of this book on his website: http://www.k100.biz/e-Books.html

Unfortunately, it’s a “niche-topic book” but every vintage Tektronix aficionado will appreciate it. As an owner of 400, 500, 2400, 7000 and 11000 Series Tektronix oscilloscopes, this book is just a must-have. Well-spent 70 EUR!

Thank you Giovanni, your books are truly well-written, informative, beautiful and inspiring.

Earth got hit by a Coronal Mass Ejection from our Sun’s activity region AR3664 yesterday. Polar lights were spectacularly visible in most parts of Germany. My friend Michael woke me up around 23:30 CEST (= 21:30 UT) and I immediately rushed to the outside. After taking few (bad) pictures with my smartphone, I moved back to my apartment and observed the natural spectacle from my balcony. We even saw the International Space Station passing over us – a very eventful evening.

The geomagnetic storm isn’t over yet, we might be able to observe further polar lights tonight! I’ll try to catch some photographs with my DSLR camera!

I will post more photos here.

I bought a Höcherl & Hackl PL506 DC electronic load just recently. It’s a nice piece of equipment to test switch-mode power supplies (SMPS) or any DC power sources like solar modules or batteries. I will need few of those for Tektronix SMPS repairs. As far as I can tell, DC electronic loads are rather rare and expensive units. So I grabbed one on an auction site for a very decent price compared to current offers (which is crazy, they ask 600…1000 EUR for such unit).

After unboxing and shaking the unit, I noticed a strange noise. Since it’s easter holidays here in Germany, I thought it was some kind of a “Kinder Surprise Egg” time!

But no, I was disappointed. No easter eggs 🙁 It was the fan which broke off.  I looked for other damaged parts and defects but there were none. No signs of burned parts, bad electrolytic capacitors etc. Looking good inside!

The vibration isolators probably became brittle over the years and broke during the transport. The fan fell off and had to be reattached.  The front panel buttons are a bit crusty, too and will need to see a maintenance one day. The heat sink could need a clean-up, too. Build-up of dust and dirt diminishes heat transfer and can cause either performance issues or overheating of power dissipating MOSFETs.

I was looking for a suitable replacement in my electronics parts bins but found nothing. I used zip ties to reattach the fan to the heat sink. The unit was fixed in less than 10 minutes.

A quick test with a random 13.8 V SMPS was successful. I was able to load 19.9 A at ~13.4 V which corresponds to ~267 W output power of the SMPS. This DC electronic load is capable of dissipating 500 W continuously or up to 900 W short-time. This was a short-time test with 4 mm banana cables since I didn’t have proper high-current cables at hand.

Very nice addition to the lab. Hope this will be useful for future repair and maintenance projects!

 

It’s currently cold outside (-8 °C) here in Germany and I skipped my cycling tour yesterday. Instead I got myself some stuff to play with during the cold and dark winter days.

A “new” handheld oscilloscope Tektronix THS 720 (STD) appeared in my lab! It had a dead Ni-Cd battery so I replaced it with a new one. It seems to work, however, it also seems to have the usual aging issues with optocouplers. Channel 1 shows some DC offset while Channel 2 looks fine DC-wise. The price for this scope was really “OK” (<200 EUR), it’s great for troubleshooting switch-mode power supplies due to fully isolated oscilloscope input channels. It has a built-in multimeter to check voltages simultaneously – great tool for repairing broken test equipment! Well, this instrument also needs a repair, so it’s some kind of repairception? hmm

On the bottom right, we have four Sprague TANTAPAK® wet slug tantalum capacitors, 820 µF, 20-30 V(DC) each. If they haven’t been abused and aren’t leaky, maybe they will be used as decoupling capacitors for a nanovolt noise measurement of a LTZ1000ACH. Need to be tested for their capacitance, ESR values and leakage current. See Jim Williams’ work on Linear Technology Application Note 124.  A HP 10514A mixer can be seen on bottom mid. Bought it out of curiosity, will test it. Top left shows a 10 MHz OCXO for a HP 53131A type of frequency counter. On the left hand side, a SUNSHINE IC socket fixture can be seen. A friend told me it was used along with an ancient SUNSHINE EPROM programmer PC card, the one with an 8-bit PC/XT-bus maybe?

Bottom left shows a Raspberry Pi 5 (8 GB) with a cooling fan. Raspi5 was announced in November 2023 but I couldn’t buy it in online shops because there were none available. It took them almost 6-7 weeks to restock their supply. I didn’t want to pay high prices for a Raspi 5 on second hand markets because the offers were 30-50% overpriced in the order of 130 – 150 EUR (which is crazy!). Will be a nice upgrade to my Raspi 3B standing army. I’ve ordered some accessories such as a cooling fan, the 27 Watt USB-C Power Supply, a black case, RTC battery, Micro HDMI adapter cables and a microSD card.

And there is a possible repair project on the horizon. A HP 3458A has presumably lost its calibration data due to a dead battery of the Dallas DS1220Y-150 Nonvolatile-SRAM. The NV-SRAMs in a HP 3458A store settings/preferences and calibration constants. As long as the unit is powered up, the battery coins inside of the Dallas ICs aren’t discharged. However, once the digital multimeter is turned off for a longer periods of time (e. g. months, years), the battery is slowly discharged. Unfortunately, the discharge curve of a NV-SRAM does not show any signs of discharge when measuring its voltage – instead the battery voltage drops suddenly below a power-up threshold and all stored data is lost. The life time of the battery can last between ~8 up to 30 years and it strongly depends on environmental and usage factors. Therefore: please do backup of your IC contents in order to prevent a potential nightmare.

 

HP 3458A is a famous example but there are also oscilloscopes out there (e. g. Tektronix 2465B/2467B, older TDS Series) with a memory-loss time bomb. I’m currently taking care of ordering replacement NV-SRAMs and will try to revive the unit.

I’ll resume my cycling efforts tonight. It’s no pleasure doing this at -8 °C mostly because of cold wind blowing into the face for about an hour or so. Nevertheless, there is no bad weather, only bad clothing!

The new year is already 5 days old. Nevertheless, happy new year to everyone who reads this blog. As always, I’ll try to post on a regular basis about my adventures in the fields of bike touring, amateur radio and test equipment / gear acquisition syndrome. Keep up the good work, may your projects be fulfilled in 2024. Stay healthy and sound and keep up a positive attitude.

73, Denis (DH7DN)

I bought a Tektronix 576 Curve Tracer on the second hand market some time ago. Unfortunately, the seller wasn’t able to ship it and he did not live in my region. The pick-up place was near the town of Düsseldorf – a 350 km distance from my place. Oh boy…

The problem with this particular curve tracer is its size and weight: it can’t be hand-carried for long distances because it’s a 35 kg (~70 lbs) chonker. Even if it’s carried by one person, one has to be very careful not to damage delicate parts and also for health and safety reason when carrying heavy instruments in a wrong posture. Shipping this curve tracer via regular parcel service is almost impossible or very expensive. Since I don’t have a car right now and car rentals are also very expensive, I tried to pick it up and bring it back home by train. The idea was to use a small hand truck for transportation in busses and trains. This way, it should be possible to treat it as luggage.

Well, it kinda worked out somehow! I started my journey in Braunschweig at around 8 am and headed towards the central train station by public transport. Luckily the connecting trains were on time so I reached Düsseldorf at 12 pm. The seller was very kind and agreed to meet at the nearest train station where he handed over the curve tracer with a manual. It took me about 20-30 minutes for packaging and securing the curve tracer with straps.

The journey back from Düsseldorf to Braunschweig was much more difficult and was delayed multiple times. However, time was not an issue and I managed to get back home with a 2 hours delay at 7 pm. The total price for travelling by train in both directions was around 70 EUR which is comparable to current gasoline prices for a ~700 km route.

I used some cardboard pieces and soft foam to protect the knobs and sensitive parts. Hard foam was used to protect the back side and a grey soft foam mattress was added for additional cushioning. The bubble wrap was used as thermal isolation and rain protection (temperature shocks aren’t good for electronic and plastic parts). The straps were used to secure the instrument so it doesn’t fall over. The blue masking tape is really useful for attaching the cardboard to the housing. The masking tape is very easy to remove without leaving tape residue or peeling off the paint.

After getting back home, it took me some time to unpack the Curve Tracer.  I’ve waited at least 24 hours to power up the unit since it had to acclimate to the ambient temperature. It’s not a good idea to power up a cold instrument which has been exposed to low temperatures for hours. I was very tired after the travel but everything seemed to work out very well.

I couldn’t find any broken or damaged parts. Taking a look inside of the instrument showed no signs of a transport damage. From my experience, such a delicate instrument needs to be handled properly, you can’t always trust the parcel service. Taking care of the transportation is the only way to ensure the instrument will “survive” the move from A to B. Who else didn’t experience the “Courier Transformation” at least once in their life?  By the way, it’s a nice pun to the “Fourier Transformation” 😉

As you can see, heavy instruments can be transported by train, at least here in Germany. However, this transportation method becomes very impractical as soon as the round trip times exceed 12-13 hours. Travelling 12+ hours by train is no fun for sure therefore it’s not always a viable method.

That’s it for today. The next blog entry will show some post-power up experiments and shots of the Tektronix 576 innards.

Introduction

Changes of temperature may affect measurement instruments in a negative way: thermal noise, drift of operating points, thermoelectric effect etc.. Every device has a so-called temperature coefficient (short: tempco or TC) which states how the system behaves when subjected to temperature change. Tempcos have to be taken into account when designing an electrical circuit (e. g. a voltage reference or an oscillator) or running an instrument outside of defined environmental conditions. Humidity usually affects the buildup of electrostatic charge, growth of biological organisms (e. g. mold), it may accelerate corrosion of metals and may lead to changes of electrical properties of capacitors and mechanical properties of some materials such as wood or epoxy due to surface absorption of water molecules. Therefore the environmental conditions have a significant influence on any kind of measurements and therefore need to be monitored and controlled. Since the “controlling” part (a.k.a. air conditioning) can be very difficult and expensive for a hobbyist nowadays, I was interested into the “monitoring” part.

Monitoring temperature and humidity during measurements can be of great help as soon as one has to analyze and interpret long-term measurement data. Usually the crucial question is: “Can this unwanted drift of my Device Under Test be attributed to the change of environmental conditions?”. If the answer to this question is “yes”, one can decide to take appropriate measures to deal with changing environmental conditions.

Monitoring temperature and humidity can be done very easily. Everything one needs is a sheet of paper, a pen, a clock, a thermometer and a hygrometer. Writing down time, temperature and relative humidity is the simplest method of monitoring the environmental conditions. But what happens if you have to run a measurement over a span of few days or weeks? You certainly would have to deal with missing data or data gaps. This is where a temperature and relative humidity (TH) data logger comes in place as a very useful piece of test equipment. A TH data logger is basically a small computer with storage memory (e. g. SD card), a clock and temperature/humidity sensors. Modern devices have more capabilities such as WiFi connection, graphical displays, multi-sensor logging, database connection and much more. A data logger is used to monitor environmental conditions 24/7 in a laboratory or any room of a building (bathroom, basement, radio shack, storage room, …).

Computers, memory and temperature/humidity sensors have been become very affordable in recent years and can be easily turned into loggers. This can be done with inexpensive Arduino based microcontrollers or Raspberry Pi single-board computers.

Buying stuff – the devil is in the details

Me being lazy, I didn’t want to spend much time on the development of temperature loggers. I am certain that there are few interesting projects on GitHub out there which I’ll check out soon(tm). After a few weeks of searching, I found two commercial dataloggers on Kleinanzeigen (German analogy of Craigslist) in the 60-90 EUR range which is not bad at all. One of those data loggers I acquired was the Lufft Opus 10. I’ve heard of the German company Lufft before – they are a reputable company in the fields of climate and environmental measurement equipment. Opus 10 is a TH logger with a LCD display and an USB interface for readout/control of the device. It was manufactured by Lufft in the mid 2000’s and I bought a second hand unit still in a working condition – albeit the battery was already drained up and needed to be replaced soon and it will probably need a calibration.

As soon as I got the TH logger, I started looking online for drivers, software and documentation. I realized that this particular product was discontinued by Lufft probably 10 years ago and there was no real support for this product. Thanks to Google search and Archive.org I was able to find the manuals, datasheets and the Lufft SmartGraph logger software.

Lufft Opus 10 teardown and battery replacement

I’ve made some photographs of the inside. Opus 10 is measuring the temperature probably with a NTC resistor (blue blob) and the relative humidity with a capacitance sensor. Besides that, I couldn’t find anything unusual. FT232BL can be seen clearly, along with two EEPROM ICs. Off-the-shelf-components from the mid 2000 era were used, I haven’t seen any special circuits or ASICs.

Description of the problem

After plugging in the USB device in my PC, the device couldn’t be found and drivers had to be installed manually. Unfortunately the SmartGraph software did not contain any Opus 10 drivers so no communication could be established between the data logger and PC. I thought maybe the previous versions of SmartGraph may have the drivers included so I started downloading versions dating back to the Windows 95 era. No luck at all. No drivers could be found. Since I didn’t have the original installation CD-ROM (or diskette), I could not establish a connection to my PC. It was a bit disappointing but not bad – the device would act as a TH display for the next couple of months which was good enough for my “pen-and-paper-logging” approach.

Fast forward 4 months and the battery finally died. Luckily, the seller sent me replacement batteries which were rather special type 14500 batteries (Li-SOCl2, 3.6 V) – not the standard AA  1.5 V. Battery replacement was a piece of cake, no problem at all. But as soon as the unit woke up, it was asking for a “SET CLOCK” procedure. After checking the manual, I soon realized that I had a problem: after battery replacement, the internal data logger clock needs to be synchronized with the SmartGraph software. The following three days were an unique PTSD experience in combination with nightmares. Being a bit pissed off that I probably just bricked the unit by simply replacing the battery, I just thought “Fine, I’m going down this rabbit hole – should have done it four months ago” and try to fix this damn thing.

I don’t want to write down every step and every Trial & Error in detail. I’ll try to give the reader of this blog entry an installation procedure in a short manner so everyone using this kind of Lufft Opus Series can install the drivers and establish a connection with the PC.

Fixing the brick

During the teardown I noticed that the communication between the data logger and PC is performed via a FTDI FT232BL integrated circuit. It’s basically a USB to serial UART interface with many features, e. g. the capability to store “USB Vendor ID (VID) and Product ID (PID), Serial Number and Product Description strings in external EEPROM”. During the late 1990’s and early 2000’s, the communication of similar Opus models was usually performed via a 9-pin serial interface (also called COM-port or RS232). They must have upgraded their legacy peripherals from RS232 to USB in the early/mid 2000’s. There are probably two EEPROMs on the lower PCB: Atmel812 93C56A for sensor data and DS 2430 for USB VID/PID. I couldn’t find any microcontroller on board, since the data from the sensors need to be converted in physical units and communicated to the display. Perhaps it’s hidden under the LCD display.

Now knowing that a FT232BL integrated circuit is used inside of Opus 10 is an important bit of information because one can pin down the correct drivers provided by the manufacturer Future Technology Devices International Ltd (FTDI). Just a quick sidenote: FTDI has been confronted by plagiarism ICs in the past where their chips were copied by different Eastern Asian companies. Using a plagiarized IC with their driver can be seen as breaking the user’s license. There may be a scenario where FTDI drivers can brick a plagiarized device due to “reasons”. I haven’t observed it yet, just heard of the possibility where the drivers renders the fake IC unusable or at least it blocks its operation – so be careful and make sure you’re using the original (expensive) FTDI IC!

As a side project, I digged up my old IBM ThinkCentre PC from the 2004 era and installed Windows XP on it. Sometimes it’s nice to have one old PC for testing 20 year old hardware and software. After plugging in the Opus 10 into the PC, I get an unknown device called “DATALOGGER”. I wondered why the device was called that way and where did it get its name from instead of generic name such as “USB Serial Port (COM3)”. After two days of research and trying different things out, I’ve stumbled upon the FTDI Technical Note TN_100: USB Vendor ID / Product ID Guidelines. Basically FTDI ships their ICs with default VID and PID which can be customized by anyone who’s using them in their electronic designs. So basically there is a small EEPROM chip where the “DATALOGGER” name string and the custom PID are stored. Every time the USB device is plugged in, it sends those identification strings to the PC. The PC needs to find proper  USB drivers which match the VID/PID. I’ve looked into the hardware description of Opus 10 and got the VID Number 0403 and PID string “D6B8\12345678”. So they customized the PID and identification strings which was a problem for the operating system. The table below helped me to identify the VID/PID associated with the FT232BL so I started looking inside of the driver INI-files for this kind of information. I’ve quickly found the 0x0403 and 0x6001 IDs and I was hoping that renaming the default PIDs into the Lufft customized ones would help the operating system with driver identification. So that’s basically what fixed the problem. I edited bunch of INI-files and after plugging in the data logger, it was recognized immediately and I was able to install the proper FTDI drivers. The FTDI Application Note AN_107: Advanced Driver Options has a bunch of additional information how to customize their driver settings.

This workaround should also work on modern PCs running Windows 7 or Windows 10.

Step-by-step procedure

(Unfortunately) I am using a German version of Windows XP. However, it should be possible to get the idea of what needs to be done. After plugging in Opus 10, check the Device Manager for the newly discovered DATALOGGER. Check its properties and look for the “Hardware Detections”. There should be somewhere the VID and PID of the device. Write down the VID/PID and download the FTDI drivers for your operating system.

I’ve been testing many versions of the FTDI drivers but it seems there is no significant difference between them. Just get one which works on your system (WinXP x32 in my case). I’ve downloaded CDM 2.08.24 drivers from the FTDI website. Unzip the drivers and you should get a similar file and folder structure as shown here.

Next step demands the editing of ftdibus.ini and ftdiport.ini files. Just use a simple text editor. Search inside of the INI files for the PID number 6001. There should be in total 3 lines where PID_6001 appears. Replace the PID number 6001 with the newly found Opus 10 PID (e. g. D6B8).

Notice: Maybe it would be better to make a copy of the line to be edited and edit leave the PID_6001 line untouched just in case you plan to connect a FT232 based IC without custom Product ID! I haven’t tested it yet but it seems like a better approach.

After modifying and saving the INI files, one can proceed with the DATALOGGER driver installation. Use the Device Manager and start the driver update. The driver installation wizard should be pointed to the directory with the modified INI files.

Since we’ve modified the drivers, the WHQL certification fails. This can be safely ignored. After two subsequent driver installations, the devices should appear as “USB Serial Port (COM3)” and “USB Serial Converter”.

No further changes are needed, the COM3 settings seem to be typical at 9600 baud, 8 data bits, no parity bit, 1 stop bit (a.k.a. 9600 8N1).

The last step demands the installation of the Lufft SmartGraph software. I’ve used version 3.0 from the year 2005. A newer, modern version v3.4.5 should work, too. The data logger should be visible as a new COMx device. With SmartGraph you can change settings of the data logger such as logging intervals, min/max alerts, physical units etc. Getting familiar with SmartGraph takes a bit of time so I leave this as an exercise to the reader 😉

Conclusion

I consider myself “lucky” because in hindsight, this fix was easy – but it was nowhere documented on the internet. The trial & error approach cost me about 2-3 days of fiddling but it was successful in the end. The other option would have been grim: the data logger would be rendered unusable unless doing further reverse engineering. This is so unacceptable! Reverse engineering wasn’t clearly my goal on a 20 year old device – otherwise I would have invested my time in DHT11/22 and Raspberry Pi programming. There was a discussion on a German Windows 10 forum dated back in the years 2018/2021 concerning Lufft Opus 10 driver installation problems but their posts didn’t provide any useful information except “tried this driver and it worked!”. One of the users apparently fixed the problem by using a Prolific driver which I have also tried out – without any success. I’ve even contacted Lufft’s Support on this matter and they kindly provided me some information and further hints what could be done.

For my part, I’ve learned again: The Internet DOES forget. Thanks to Archive.org it was possible to browse old websites and get documents and files which I needed. It’s very important to download drivers and documentation and host them on independent sites. Otherwise it will become even more difficult in the years to come to have access to information of already discontinued products.

I’m hoping that this information will be useful to other amateur radio operators because there are some similar problem descriptions concerning the usage of programmable transceivers. Those transceivers also use a USB/RS232 IC which demand certain FTDI drivers and perhaps it’s possible to revive them with a simple modification of the INI files.

73, Denis

The German Amateur Radio Club (DARC) has just recently set up their own Mastodon-based social network server. It’s basically a social network similar to Twitter with a decentralized server structure. I think I’ll try it out for the next couple of weeks and share bits and pieces of daily adventures which may not fit in a classic blog format. Currently there are 114 registered entities at DARC and perhaps more people and amateur radio districts will join.

I must admit that I strongly dislike the anti-social part of social networking which extends in the fields of politics, religion, manipulation, opinions, viral social debates and trolling. One word: internet toxicity. I like fun and memes. Let’s hope the toots stay technical and hobby-related 🙂

You can read my toots (this is how they call tweets in Mastodon) here: https://social.darc.de/@DH7DN

If you’re member of the DARC, you can set up a Mastodon account with your existing login information at https://social.darc.de

Currently I’m preparing my equipment for the next SAQ broadcast on Sunday, July 2nd 2023. There will be two transmissions: first transmission at 11:00 and second at 14:00 o’clock (CEST).

Have a wonderful day!

73, DH7DN

During a flight back home from a recent business trip, I was lucky to get a window seat. I was thinking of the possibility to see some stars of the night sky above the clouds and I wasn’t disappointed. The flight was held entirely during night time with cabin lights turned off. This was crucial because cabin lights are an additional light source which make unwanted reflections visible. The reflections usually overcast faint light sources such as stars. I took some photographs with my smartphone Samsung Galaxy S22 at exposure duration of 20-30 seconds and ISO 3200. The exact location of the photograph is unknown, it must have been somewhere in a part of south-eastern Algeria over the Sahara desert while looking to the east. I would estimate the position as follows: 23° North, 8° East, flight attitude 11 km (36 000 ft).

I made about a dozen pictures of the night sky but due to minor turbulence and slight flight course corrections, most of the images were shaky and had to be discarded. However, I was able to get 1-2 pretty decent pictures of the night sky which turned out to be OK. I was pressing my smartphone against the window to avoid shaking motion and put a pillow over it to block most of the residual (emergency) cabin lights.

The taken pictures show some prominent stars from the constellations Cygnus and Lyra: Vega, Deneb, Albireo and others. I was able to identify some stars by using an web-based star map application such as Stellarium Web. During the flight I could observe meteor flashes occasionally (no picture taken though) and lightning of distant thunderstorms, which were perhaps >200 km away. There were virtually no city lights visible during the flight over Sahara desert. Just imagine being there and watching the night sky without any light pollution…

The 8-hour-flight was very tiring because of lack of space to move and stretch. Sitting for hours in an uncomfortable position wasn’t very pleasant but it worked out somehiw. However, I was able to catch some nice pictures of the world 11 km below my feet. #worthit

Measuring voltages accurately is a basic task for technicians, engineers and scientists. The voltages to be measured range from perhaps few picovolts to several megavolts – a dynamic range of 18 orders of magnitude! But every modern digital multimeter is kinda limited in resolution. The multimeter’s resolution can be stated in the number of digits it can resolve. A 6 digit multimeter can resolve six decimal places going from 0 to 9. In a decimal number system, this corresponds to \(10^6\) numbers or 1 million digitizing steps. Without going much into detail and exposing my limited knowledge on this matter, I’ll just link to Keysight’s Website where everything is well explained.

Older multimeter models such as the shown MeraTronik V543 can resolve only \(2 \cdot 10^4\) numbers in the selected measurement range (e. g. ±1 V = 2 V full scale:  \(2~V/2 \cdot 10^4 \rightarrow 100~µV\) resolution).

One of the best and most accurate digital multimeters in present time – the HP 3458A – has “only” a resolution of 8.5 digits, which hasn’t improved for about 35 years.

The so-called “Voltnuts” (crazy electro-fanatics) buy those HP multimeters on a second hand market for $3k to $7k. This surely is crazy and overpriced and in my opinion just not worth it. How about buying a couple of cheaper 6.5 digit multimeters (e. g. HP 34401A for about $200 to $400) and combining them in a serial configuration? I’ve achieved a total of 19.5 digit resolution this way*. I was able to display 10 volts up to 18 decimal places, e. g. attovolts resolution and saved a lot of money.

*If you don’t believe this nonsense, it’s fine. I can live with that. It’s April Fools’ day anyway 😉

Introduction

About a year ago I saw one of CuriousMarc’s YouTube videos on repairing a Xerox Alto computer. CuriousMarc published shortly afterwards an episode, which compared the Tauntek LogICTester with the TL866II+ EEPROM programmer which has some transistor-transistor logic (TTL) testing capabilities. 1970’s and 1980’s era test equipment used alot of those intergrated circuits (IC) in order to operate. Servicing or repair of older test equipment like oscilloscopes, multifunction calibrators, power supplies etc. will be much easier with tools such as a logic tester. After reading a very positive review from a friend at the Wellenkino, I thought it would be very nice to own such a tester for servicing or repairing my (broken) equipment.

Tauntek LogIC Tester

I contacted Bob Grieb of Tauntek and ordered one of his kits back in March 2022. The $35 kit contained the printed circuit board and two pre-programmed PIC microcontrollers. The shipment to Germany cost me about $19 with additional 10 EUR for customs and fees. The total cost for the kit ans shipment was in the order of $64 or approx. 60 EUR. The shipment from USA to Germany took about week and a half.

After receiving Bob’s package, the project got delayed because I’m always kinda busy. I ordered most of the remaining parts via Mouser in December 2022. The ordered parts would cost additional 69 EUR. Many of the components on the bill of materials (BOM) list could have been easily skipped (e. g. resistors and 2x PIC microcontrollers, RS232 level shifter) resulting in 45…48 EUR price range. Nevertheless, I ordered few extra parts just to be sure if anything fails. Extra parts can be always used for different projects or experimenting with other circuits.

Two of needed parts on the BOM weren’t available at the time: the 74HC138 3-to-8 line decoder and LM358AN dual opamp. According to Mouser, the lead times for the decoder were four weeks and for the opamp approx. 1 year (which has been reduced to May 2023 in the meanwhile). So yeah, I had to order both parts on eBay instead. Waiting a year for an opamp wasn’t acceptable. I also ordered an USB to TTL FTDI Serial Adapter on Amazon (2 pieces for 8 EUR) so I could use the Tauntek LogICTester via USB instead of RS232. Everything arrived last week so I had to find few “quiet hours” for the soldering job.

Building the IC Tester

One starts with the printed circuit board and two PIC microcontrollers (U1 as Master and U2 as Slave) as shown in the picture below.

I started populating the resistors and diodes in the first place. After soldering and cutting excess wires, I moved on to capacitors.

After hours and hours, I finally got it finished. The pins in the top right corner needed to be removed. Also JP1 and JP2 (top right above the IC socket) were shorted by a solder blob in order to use the FTDI to USB adapter instead of the RS232 level shifter. The level shifter 16 pin socket on the top right remains unpopulated. The final assembly can be seen in the picture below.

After assembly I checked for cold joints or shorts. Everything looked fine and I turned it on.

After plugging in the USB cable of the FTDI adapter into the Windows 10 machine, the driver installation started automatically. No additional drivers were needed to be installed. The settings for communication via Serial connection were by default “8-N-1”, which corresponds to 9600 baud, 8 data bits, no parity bit, 1 stop bit and no flow control. The connection needs to be established via a terminal emulator such as PuTTY. After establishing a connecting to the tester, one has to press ENTER to get the welcome screen and voilà, We’re In Like Flynn.

The usage of the IC tester is pretty much straight-forward. Power up the tester, establish a PC connection and put the IC into the socket as shown in the picture above. Enter the IC model inside of the console.  If the IC is found inside of the database, type t and press enter to start the IC test. The results are presented in a very comprehensive way. Typing v and pressing enter displays the pin voltages.

That’s it – there isn’t much more to it. Very simple and effective when it comes to debugging the 1970s to 1980s era logic ICs. Few additional hints and comments:

• Unfortunately the IC tester can not be used in order to recognize part numbers of ICs under test. The part numbers have to be looked up manually inside of the terminal emulator (or Bob’s list)
• Bob maintains the firmware and the list of supported ICs. Perhaps by writing him an email and by sending him the missing or unsupported IC, Bob may update his firmware in the future and add support for the missing IC
• The logic tester certainly isn’t free of bugs – some tests may result in a “FAIL” although the IC is still fine according to the datasheet specifications. Please, don’t blindly trust the machine. Take your time and try to sanity-check or interpret the results
• The logic tester can’t check memory chips for faulty memory cells (such as Retro Chip Tester Professional from the 8Bit-Museum.de)
• I’ve added a picture gallery to my Piwigo website if you want to check out some additional pictures

Have a nice Sunday and happy IC testing!

If one wants to capture analog images or analog videos (e. g. images coming from a CCTV camera), those signals need to be digitized, decoded and displayed with a device called framegrabber. A framegrabber is basically a video capture card with fast video processing capabilities and onboard memory which is useful for image processing.

I wrote in my previous post how to make good quality screenshots of the Anritsu MS2661N front display. However, there is another ancient method how to acquire images of frequency spectra. In modern test equipment, the video signals are transmitted digitally via DisplayPort or HDMI. Some 20 to 40 years ago, the manufacturers offered instruments with an optional analog video output which could be connected to a television screen or to a video recorder for viewing or documentation purposes.

I’ve got myself a framegrabber card NI PCI-1405 for different projects. I wanted to test the card for its functionality. The quickest access to an analog video was via the composite output of my spectrum analyzer as shown in the previous picture.

The NI PCI-1405 framegrabber card has two inputs: a 75 Ohm video input and a 75 Ohm trigger. The video input is connected via a 75 Ohm cable (type RG-59) to the composite output of the spectrum analyzer.

After installing the drivers from National Instruments, the framegrabber card was successfully detected and I was able to grab some frames inside of NI MAX (Measurement & Automation Explorer).

I didn’t bother to improve the image quality – this task will be relevant for future projects as soon as I get my Tektronix C1001 camera running 🙂  So far, it’s been a successful test!

Hi everyone,

let’s just forget 2022 and move on. Covid, inflation, wars and conflicts – it doesn’t get better. Nevertheless, I had many positive moments in 2022, too! I had some lucky test equipment acquisitions, I managed to sell unused test equipment and free up some space, did some Python and GPIB programming, did a bike tour, met lots of nice and interesting people throughout the year, finally published some decent blog posts and successfully reduced my weight from 132.9 kg (290 lbs) to 115.5 kg (254 lbs) in 365 days.

There is a lot more to do in 2023 and I’ll try to keep up with publishing interesting blog posts. My new year resolution in 2023? No new resolutions! They are useless – at least for me.  I have a bunch of interesting projects on my list and I hope they will happen some day… perhaps this year. If you take on too much, you will end up doing nothing at all.

Happy New Year 2023, stay positive, safe and sound 🙂

73 de DH7DN

Introduction

Over the past two years, I have acquired a decent amount of Tektronix analog oscilloscopes. I would say “decent amount” because having 10+ oscilloscopes is not that much compared to other Tektronix enthusiasts. Nevertheless, my colleagues already started questioning my sanity. Different topic. I really like Tek analog oscilloscopes and I love to work with them. However, doing everyday measurements in analog has its downsides in terms of comfort and workflows. It was about time to go digital!

Analog vs Digital

Do you want to do a “quick” measurement and document it? Sure: turn on the oscilloscope, set the ranges/triggering and observe the electron beam trace! Experienced users can set up the measurement in seconds to less than a minute. However, when it comes down to taking quantitative measurements, this process may take a while. If the values of the amplitude, phase or frequency of a signal are not of importance, e. g. one does qualitative measurements where just the shape of the signal is of interest (sinewave, squarewave, noise), the measurement can be done in a matter of seconds. However, if quantitative measurements are of importance (amplitude, phase, frequency, risetime), the average user will spend a lot of time counting the marks on the graticule which can be prone to errors, too.

In order to document the measurements, one has to take photographs of the screen. Unfortunately, some analog oscilloscopes have no measurement annotations on the screen. The user has to take care of this – it can be a huge trap for young players. I’ve been there before and it wasn’t easy figuring out why I have 13 pictures of oscillograph curves but only 10-ish lab notes documenting the oscilloscope settings… Which setting did I use for Channel 1 and Channel 2? Why are the images blurry? How about those annoying reflections on the screen? Another downside of an analog oscilloscope would be of a “first-world-problem” type: at very low frequencies (in the range of few Hz), it’s very difficult to view a complete image of a single waveform. The electron beam  sweeps too slowly across the screen – it doesn’t leave a persistent trace which makes reliable measurements difficult. However, it is possible to view single waveforms with an analog storage oscilloscope.

Fast-forward to the 1990’s to 2020’s – the era of digital oscilloscopes. The early digital models were slow and limited in their measurement capabilities. The advances in technology (improved analog-to-digital converters, more RAM and storage, digital signal processing, automation) helped digital oscilloscopes to become very powerful instruments. As the name suggests, a digital oscilloscope converts an analog signal into a digital one. Once the time-dependent (analog) voltage has been converted into basically numbers, one can play with waveforms and do useful calculations. It’s very easy to calculate values such as min/max/average or standard deviation. Implementation of sophisticated signal processing algorithms opened the doors to Fast Fourier Transform (FFT), logic analysis, complex triggering and much much more. Digital oscilloscopes also have one huge advantage over their analog counterparts: one can capture and store a single waveform for viewing (e. g. zoom in in order to see more details). Tektronix released a very nice publication on this matter, The XYZs of Oscilloscopes Primer. It can be downloaded for free from Tek’s website.

Purchase Criteria for a Digital Oscilloscope

In my case, I just needed a general-purpose digital oscilloscope in order to make quick measurements and do the documentation stuff.

Now what to look for? The key specifications would be: number of channels, analog bandwidth, sampling rate, memory and vertical resolution. Modern-day oscilloscopes have all kinds of additional features such as interfaces (USB, RS-232, Ethernet, GPIB), touchscreen display, integrated digital multimeters, VGA/HDMI/DisplayPort, input termination (1 MΩ/50 Ω) and much more. Those features can improve your workflow and speed up your work. I should mention that the size of the oscilloscope can be important, too. Digital oscilloscopes can be very compact and take almost no space on the bench compared to their analog counterparts. This is important for people with space constraints like a student’s living room or a small garage. There is one more parameter which sums up the features: the price 🙁

I’ve scrambled few hundred Euros in order to buy myself a 2nd hand digital oscilloscope. Since 2010’s/2020’s oscilloscopes are a little bit too expensive, I’ve looked into the mid 1990’s to mid 2000’s era digital oscilloscopes. By the end of 1990’s, digital oscilloscopes had quite potent measurement capabilities. Tektronix and Agilent Technologies (successor to Hewlett-Packard, now Keysight Technologies) designed excellent oscilloscopes for all kinds of applications – mobile communications, digital design and debugging, video and others. Other brands to consider would be Fluke/Philips, Hameg (today Rohde & Schwarz) or LeCroy. Fast-forward 25 years into the future and a 1990’s 20k USD high-end oscilloscope can be bought today in the order of just few hundreds Euros. I guess the only reason I’m stuck with Tektronix oscilloscopes in general is their excellent documentation (User and Service Manuals) and the ability to repair it according to the documentation. Huge props to Kurt of TekWiki and also to all the TekWiki contributors and enthusiasts which maintain the wiki pages and manuals archives. Another invaluable source of Tektronix-related information is the mailing list TekScopes@Groups.io.

Speaking of few hundreds of Euros: the price range below 1k EUR is in direct competition with modern-day digital oscilloscopes! I certainly had considered whether to spend let’s say 500 EUR on a new Rigol oscilloscope (which can be hacked/upgraded to a multi thousand dollar machine) or  on a 25 year old vintage chobby which has possibly seen darkness, torture, abuse and failures. I’ve been hesitating buying different brands such as PeakTech, Rigol, Siglent or UNI-T for different reasons. Don’t get me wrong – they manufacture great and affordable oscilloscopes. The devil is in the details.

Tektronix TDS 754D Series Oscilloscope

The Tektronix TDS Series seemed to fit very well in my scope scheme. I was looking for a decent amount of analog bandwidth (at least 400 MHz), a high sampling rate (if possible 5x to 10x the analog bandwidth) and 4 channels. Tektronix TDS 784D came in my mind because it had everything I needed. Unfortunately, it wasn’t available at the time on German markets like eBay or eBay-Kleinanzeigen (German analogy to craigslist). So I was looking for a suitable alternative. The EEVBlog community has quite a few threads on TDS Series oscilloscopes. One in particular was interesting: the models TDS 754D and 784D are electronically nearly identical. It is possible to convert a TDS 754D model (500 MHz bandwidth) into a TDS 784D (1 GHz bandwidth) by means of a small modification. This modification (removing a resistor and few capacitors) is well documented and can be done very easily. Since there were few Tek TDS 754D oscilloscopes on the market, I thought to give it a try.

First Impression

Tektronix TDS 754D is a compact unit when compared to my 7000 Series “boat anchors”. It has a very clean designed front panel, color display and vents for a large fan (approx 15 cm diameter) on the left hand side. The noise generated by the fan is a little bit annoying but tolerable. Since the heat generated by the oscilloscope has to be carried away, it’s crucial to maintain a proper airflow. There are many ventilation slots on the housing which need some clearance, otherwise the oscilloscope may be damaged due to overheating. Booting up the device takes about a minute and the warm-up time is at least 15 minutes. The color display is a little bit strange: while moving my head, the display colors are splitted into their red/green/blue components (color fringing). This is a little bit annoying but on the other hand, the image quality (in resting position) is very good – sharp image, rich colors, “dark theme” which is pleasing for my eyes when working in dim or darker environments. The oscilloscope takes quite a lot of space on the workbench. Placing the oscilloscope outside of ergonomic positions is not recommended because one has to push many buttons and turn the knobs in order to find optimal settings.

Quick Check of the Four Channels

The pictures provided by the seller showed a deviation on Channel #2 which was a little bit worrying. He attached the probe and got no signal displayed. The root of cause could have been anything ranging from a defective channel to false user setting. Luckily, it turned out to be a false setting by him. All four channels were tested with a function generator in 50 Ω and 1 MΩ (“High Z”) terminations. The amplitude was set to 1 V_pp at various frequencies – The sine waveforms were clean without any visible noise or distortion. I was able to test the analog bandwidth with my Leo Bodnar Fast Pulse Generator. It generates a 10 MHz squarewave with a very steep rising edge. When measuring the 10% to 90% rise time, one can determine the oscilloscope bandwidth as shown in my previous blog entry. The rise time of channel 1 through 4 with a 50 Ω termination was in the order of 680 ps which corresponds to a -3 dB bandwidth of 514 MHz.

Menus and Settings

The menus and settings are easily accessible through push buttons and knobs. The response is good, the menus and sub-menus are arranged in a logical order. Some settings are a little bit hidden, e. g. the switch between XY and YT display modes and waveform average settings. Nevertheless, with a little bit of practice, one will memorize the location of the settings automagically. The numerical keyboard is very convenient as soon as exact setting values are needed (e. g. if you want to set the trigger level to an arbitrary value, you don’t have to turn the knob and fine-tune).

Tektronix WaveStar and Remote Control via GPIB

I must admit, this one blew my mind. I was concerned how to transfer screenshots and images from the oscilloscope to my PC. I have bunch of 3.5″ diskettes lying somewhere around and an “old PC” (IBM ThinkCentre from the early 2000’s) which could be used for data transfer. However, transferring the data from oscilloscope to an ancient PC and from there to the local network would have been a workflow horror. According to the oscilloscope manuals, the data transfer was possible either via serial interface (RS-232) or the general-purpose interface bus (GPIB). Older oscilloscopes with GPIB interface (e. g. the Tek 2465B) can be controlled remotely but the user is unable to readout the measurements. TDS Series oscilloscopes do have this capability! It’s possible to control the oscilloscope remotely and fetch the waveform data in a human-readable ASCII format. The communication with the oscilloscope can be established either via RS-232 or GPIB. The setup is straight-forward in case of GPIB: set up a GPIB address on the device, connect the oscilloscope via a GPIB controller to the PC, install VISA drivers and it should work. Once everything is installed, the communication with the oscilloscope can be checked by sending the *IDN? command.

Installing Tektronix WaveStar and Setting Up the Oscilloscope Communication

The Tektronix WaveStar Software manages the communication between the remote controllable oscilloscope and the PC. Unfortunately, the software isn’t maintained or supported by Tektronix anymore. I’m not sure if WaveStar can be obtained from the Tek website directly – however, there is a downloadable ZIP file on TekWiki. The product key for this application is available on the internet (e. g. Tektronix user forum). I have successfully installed WaveStar on my Windows 10 (version 21H2) PC. Windows 7 or Windows XP should work, too. I’ve set up an image gallery with screenshots from the installation.

Tektronix WaveStar GUI

Using the Graphical User Interface or GUI wasn’t very intuitive after starting it. WaveStar has a Explorer View which allows access to the oscilloscope functions, such as settings, measurements, cursors etc. In order to transfer data from the oscilloscope to the PC, one has to generate a new datasheet. The selection of datasheets leads to different types of measurements. The YTSheet for example is able to plot the voltage vs. time. In order to create a “screenshot”, one has to create a new datasheet “NotesSheet” and drag-and-drop the “Screen Copy” from the Explorer View Local > TekTDS454D > Data > Display > Screen Copy (Color) into the newly created NotesSheet. After downloading the Screen Copy into the NotesSheet, it is possible to copy & paste it into different applications, such as LibreOffice Writer or MS Paint. The resolution of the image is 640 x 480 px and good enough for quick documentation purposes.

Further Data Processing

After playing few hours with WaveStar, I figured out how to extract measurement data in different ways: as vector graphics and as comma separated values or CSV. Vector graphics are very nice when it comes to publication quality images. It is possible to print out the YTScreen as a PDF file (Windows 10 offers a PDF printer driver natively, otherwise you’ll have to install one manually). The informations inside of the PDF are vector graphics which can be imported into a suitable program such as InkScape (another well-known programs would be Corel Draw or Adobe Illustrator). InkScape is an open source vector graphics editor which allows to manipulate vector graphics. Vector graphics are basically numbers which contain x,y-coordinates for lines to be drawn. Bitmap graphics on the other hand are color and brightness informations stored in a matrix. Whenever scaling bitmap images, one has to deal with (ugly) scaling artefacts where vector graphics can be scaled (or zoomed in) indefinetely.

Last but not least, I was able to export the WaveformTabular data into a CSV file. A CSV file can be loaded into a spreadsheet application such as LibreOffice Calc or Microsoft Excel. The waveform data can be processed afterwards – doing statistics or digital signal processing (e. g. with Python) can be done very easily!

Conclusion

Well, I’ve got myself a very powerful digital oscilloscope now. I still haven’t tested the full capabilities of this instrument but I’m very satisfied with its performance at this point and can recommend it to anyone seeking a 20-30 year old instrument. Although I paid far too much for it (it was well over 500 EUR), it was worth it. I’ll test its measurement capabilities during my vacation which is starting next week 😉

Introduction

Since June 1st 2022 it is possible to travel within the whole country of Germany by public transportation system with a flat-rate ticket which costs only 9 Euros per month. The ticket is time-limited and valid only during the current month. It applies only to the German public transportation system (e. g. trains of German Railways such as DB RegionalBahn, RegionalExpress, S-Bahn, also metropolitan transportation  systems such as U-Bahn, busses & trams). The ticket doesn’t apply to inter-regional trains such as ICE, IC or EC and doesn’t cover 1st class travelling in any of the mentioned transportation systems.

It was proposed by the German Government as a time-limited experiment in order to motivate people to drive less cars and as a financial relief due to very high energy and gasoline prices. The 9 Euro ticket will be obtainable during months June, July and August in 2022. The financial losses to the transportation companies due to this very cheap ticket will be compensated by the taxpayers. I think this is a good idea although its execution wasn’t very well planned. Nevertheless, it’s a step in the right direction! The German public transportation system is “OK” but isn’t able to handle – let’s say – sudden passenger increases of 20% or more very easily.

My Trip from Braunschweig to Meschede

I’ve bought myself a 9 Euro ticket and went on a trip from Braunschweig to a small city called Meschede. I’ve been living and working in Meschede for about 1.5 years before moving to Braunschweig. Although its location is in mid-western Germany and it’s only 260ish kilometers distant, it is a remote location because it’s surrounded by forests and hills of the Sauerland region. There is no easy way to get inside or outside of Sauerland 😉 My trip planner calculated a total travel time of about 5 hours and 21 minutes with approx. 1 hour of exchange durations. Travelling from Braunschweig to Meschede and back by train will be at least a 10 hr and 42 minute trip (which was the case).

I’ve started from my apartment at roughly 6:30 in the morning and took the bus to the central station. My first train went from Braunschweig to Bielefeld, a ~2hr trip. The two floor train was very clean and there was enough room for passengers and bicycle users. Changing train in Bielefeld offered a different image. The train was heading in direction to Dortmund. It was pretty full with passengers and commuters but I was able to get a seat in the bike wagon. People standing around me were 10 drunk ladies (bachelor party) which were very funny and entertaining. In Dortmund, the train filled up to its maximum capacity where I felt sorry for the passengers. They were stuffed like canned tuna. I’ve spent about 20 minutes on the Dortmund central station gathering some fresh air. Nothing special: cops everywhere, fewer-than-usual soccer fans, LGBTQ pride flag carriers, occasionally religious fanatics and beggars. It’s a wild place but somehow appealing. The last section of the route was from Dortmund to Meschede. The train was OK – clean, not too full, a little bit loud due to its diesel engines. I found a seat near a group of drunk guys which were also very funny and entertaining. At one of the train stations, another drunk guy joined and collected refundable bottles. This was so unreal, he looked like a 70 year old smashed alcoholic, barely able to walk but the drunk party donated like 10-12 empty bottles of beer instantly to him 😀

To my surprise, all trains were on time and there were no major delays. I arrived in Meschede at 12:40 so the total travelling time starting from my apartment was approx. 6 hr 10 min. I couldn’t stay for a long time in Meschede because of the 6h return trip so I planned to stay for about 4.5 hours. This is one thing to consider when using 9 Euro ticket: the travel duration killed most of the day and reduced the visit duration significantly.

However, I was able to visit my old workplace and say hello to my former colleagues and some old friends. The Open-Door Day at University of Applied Sciences in Meschede offered a rich program of science, engineering, entertainment and food. The weather was excellent and very inviting.

 

The return journey was very tiring: the train from Dortmund to Bielefeld was 15 minutes late and full to the max. We were standing for about 30 minutes without any room to move until a portion of passengers left the train. Luckily due to long exchange duration, the meanwhile 20 minute delay didn’t affect the connecting train from Bielefeld to Braunschweig. The section from Bielefeld to Braunschweig was OK – no problems whatsoever. About 90% of people inside of trains were wearing a face mask due to COVID-19 pandemic which was very nice. The current infections are very low in the region of 350 per 100 000 inhabitants but one has to be careful anyways. There may be a new infection wave in the autumn this year…

Summary and conclusion

I’ve spent most of my day travelling in trains. It was cheap but also do-able. I was able to travel from Braunschweig to Meschede and back in one day for 9 Euros! This trip would have cost at least 50 Euros instead without much improvement in travel quality. I’ve been to Meschede few weeks before this trip by car and the gasoline alone cost me 80 Euros.  The quality of trains (size, cleanliness) and its connection vary significantly from region to region. One has to consider that trains will be full during commuting hours and empty outside of them. During weekends, bicyclists take up a lot of space in the trains so this can be an issue, too. The people are usually friendly and very helpful but there are also exceptions: drunk and loud people, some of them smell badly due to sweat or even urine. The toilets are in an acceptable condition but don’t rely on this – try to take Number One/Number Two at a train station instead inside of a train toilet.

The 9 Euro ticket is definitely worth it and should be used to visit all kinds of places in Germany. There are wonderful towns and regions which should be visited during the summer time. I haven’t been to cities such as Rostock, Schwerin, Konstanz, Kiel, Flensburg, Saarbrücken and many others so I’ll try to catch up with my visits.

Introduction

Taking measurements with electronic equipment doesn’t require much skill and effort: turn the device on, set up the measurement parameters such as input channel/range/sensitivity, trigger the measurement and read the numbers on the screen (if there are any). The same procedure can be applied in everyday situations – whether you have to read the time from a clock or check the temperature in your fridge/oven.

But what if one does have to take thousands or even million of measurements  every day? What happens if measurements have to be performed 24/7? There surely are applications where it is necessary  to take measurements manually but putting a human behind a bench and performing boring and repetitive measurements during a 8-hour-workday is prone to exhaustion and errors. This is where automated test equipment (ATE) kicks in. It is possible to let a computer do the “boring stuff” while the human operator may spend his or her precious time on solving problems instead of doing repetitive work. I’ve successfully stolen borrowed and tested foreign Python code and want to demonstrate how to control a digital multimeter and a function generator via General-Purpose Interface Bus (GPIB) and Python’s pyvisa module.

GPIB

GPIB is a 8-bit parallel interface bus which has been invented in the late 1960’s by Hewlett-Packard (see Wikipedia article). Prior to its standardization in the late 1970’s as IEEE 488, it was known as HP-IB (Hewlett-Packard Interface Bus). It allows interconnection between instruments and controllers. It is system independent of device functions. This de facto standard has been around for a while and is well established in the Test & Measurement industry. Fast forward to the year 2022, GPIB is still present in test equipment although in recent two decades, communication with instruments have been enabled with modern-day interfaces such as USB or Ethernet. GPIB allows a very diverse topology – one can connect all instruments either in a Daisy Chain or parallel configuration or even in a combination of both of them. There are certain GPIB-specific limitations concerning cable lengths, maximum number of connected devices, data transfer speeds and others which have to be considered when automating test equipment.

Experimental Setup

I’ve connected a HP 34401A digital multimeter to a HP 3325B function generator in order to generate a sinusoidal test signal, which can be represented by an equation \(v(t) = v_0 \cdot \sin (\omega t) \) with \(\omega = 2\pi f\). Both instruments are connected to a GPIB controller National Instruments GPIB-ENET/100. The GPIB-ENET controller acts as a bridge  and allows communication to GPIB devices via ethernet, which is highly convenient in my lab. It allows me to control the instruments via LAN from any of my computers. This device requires drivers from National Instruments so I’ve chosen NI MAX v17.5 along with NI-488.2 driver in order to be able to use the legacy GIPB-ENET/100 controller. I’m using Windows 10 along with the WinPython distribution. WinPython comes along with Python 3.9.10 and hundreds of useful modules, such as numpy, pandas, matplotlib etc. (which are optional). The pyvisa module needs to be installed manually via pip, see PyVISA’s project website for further installation instructions.

Important notice for new users

Many of the GPIB-USB adapters sold on eBay are fakes or counterfeits. They are sold very cheap (different brands such as National Instruments, Agilent/Keysight, Keithley) in the price range of 100 EUR to 120 EUR per piece whereas the genuine GPIB-USB adapters often cost more than 400 EUR. Buying a new unit directly from the manufacturer will cost in the order of 900 -1200EUR which is kinda crazy! Nevertheless, some of the fake GPIB-USB adapters seem to work pretty well and are recognized by the official drivers. However, some EEVBlog users also report having problems with fake adapters… So it’s really a gamble.

I’ve bought a 2nd hand “fake” GBIB-USB-HS for cheap which didn’t work for the previous owner but works perfectly on my Windows 10 machine. I haven’t tested it with Raspberry PI yet which will be done in a future project. The GPIB-ENET/100 unit is a little bit pricy (~200ish EUR) but the most affordable interface cards are the PCI-GPIB types. I’ve seen genuine units being sold on eBay for 40-80 EUR. No need to spend hundreds of Euros for a GPIB interface. Microcontroller-based GPIB-USB projects also exist where one can assemble a GPIB-USB or GPIB-LAN controller for cheap (which may not work always but gets the job done). Proper GPIB-cables can be expensive, too, but I’ve seen them being sold for approx. 7 … 12 EUR per piece occasionally. Custom-made GPIB cables out of ribbon cable and Centronics/Amphenol connectors may also work and get the job done.

Example Code

First of all we’re gonna need to import some Python modules. pyvisa is mandatory, other modules will be useful.

# Import Python modules
import pyvisa
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import datetime
import time

Next step: we need to open the pyvisa Resource Manager. We need to know the GPIB addresses of our instruments. For example, I’ve assigned GPIB address No. 4 to my digital multimeter dmm and the frequency generator fgen has the GPIB address No. 18. GPIB 22 is another digital multimeter which isn’t used in this example.

# Open pyvisa Resource Manager, print out a list with active devices
rm = pyvisa.ResourceManager()
print(rm.list_resources())

The print(rm.list_resources()) statement gives us the GPIB addresses of the connected devices, such as: ('ASRL3::INSTR', 'GPIB0::4::INSTR', 'GPIB0::18::INSTR', 'GPIB0::22::INSTR').  Now we can open a connection to the resources.

# Assign GPIB address 4 to dmm and open resource
dmm = rm.open_resource('GPIB0::4::INSTR')
dmm.read_termination = '\n'
dmm.write_termination = '\n'

# Assign GPIB address 18 to fgen and open resource
fgen = rm.open_resource('GPIB0::18::INSTR')
fgen.read_termination = '\n'
fgen.write_termination = '\n'

The dmm and fgen objects have been created. The statements dmm.read_termination = '\n' deal with line feed and carriage returns. The next step will set the DMM settings and call an identify string via a SCPI command *IDN?

# Set the DMM for measurements
print(dmm.query('*IDN?'))                      # Identify string
print(dmm.write('CONF:VOLT:DC 10,0.001'))      # Set DC voltage range and 4.5 digits of resolution

The same commands are applied to our frequency generator. The output of the DMM looks something like (name, model, firmware version):
HEWLETT-PACKARD,34401A,0,4-1-1
22

# Set the FGEN for measurements according to the manual
print(fgen.query('*IDN?'))             # Identify string
print(fgen.write('AM 2.0 VO'))         # Set amplitude to 2 V_pp
print(fgen.write('FR 0.1 HZ'))         # Set frequency to 0.1 Hz

The parameters such as measurement range, frequency and amplitude have been set. Now let’s take a single measurement. This is done via query command. A query is a short representation of dmm.write() and dmm.read() commands. The READ? command fetches the current measurement value from the digital multimeter.

# Example 1: Take a single measurement
print('Measured value: {} Volts.'.format(dmm.query('READ?')))

Measured value: -9.97000000E-02 Volts.

We have measured the voltage! Yaay! Its value is -99.7 mV, written in the engineering notation. Our next code example will be used to take 2048 measurements and timestamp them. I’ve used the pandas DataFrame as a convenient structure to store the data. This could have been done with numpy arrays for sure! OK, after setting the Number of acquired samples to N = 2048, I’ve created an empty pandas DataFrame. It will be filled with our precious data. The next line (6.) prints out the date and time. The t₀ variable in line (7.) is used to get the timestamp value at the beginning of the measurement. This value will be subtracted from the timestamps generated by time.time().

The for loop starts at the value 0 and calls two commands according to line (9.). It writes a timestamp and measured value into the DataFrame df at index 0. After execution of line (9.), the for loop is repeated N-1 = 2047 times. As soon as the for loop finishes, we need to convert the string-datatype voltages into floating point numbers, otherwise Python will have difficulties handling  them with further calculations.

# Example 2: Take N numbers of measurements
N = 2048                               # Number of samples to acquire
df = pd.DataFrame(columns=['t', 'V'])  # Create an empty pandas DataFrame

# Print date and time, write data into the DataFrame
print(datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f'))
t0 = time.time()
for i in range(N):
    df.loc[i] = [time.time()-t0, dmm.query('READ?')]

# Convert dmm readout strings to a float number
df.V = df.V.astype(float)

That’s it! We’ve acquired 2048 measurements. Just imagine sitting there and typing all these numbers in Excel! Such a waste of time 😉 The next line of code extracts the total measurement time from the DataFrame timestamps. The measurement took approx. 25.8 seconds to complete. This corresponds to approx 79.2 samples per second at 4.5 digits of precision.

# Show elapsed time in seconds
df.iloc[N-1].t

25.846375942230225

# Calculate the sampling rate in Samples per Second
str(np.round((len(df)-1)/df.iloc[N-1].t, 3))

'79.199'

The last step of this example will be to plot the results into a graph figure. First we create an empty figure called fig with sizes 11.6 x 8.2 inches at 300 dpi resolution. The plt.plot() command needs the \(x\)– and \(y\)– values (or time and voltage values) as function arguments in order to plot a nice diagram. We label the axes, set a title and grid. The figure is then saved as PNG file and displayed. See picture below!

# Plot the results, annotate the graph, show figure and export as PNG file
fig = plt.figure(figsize = (11.6, 8.2), dpi=300, facecolor='w', edgecolor='k')
plt.plot(df.t, df.V, 'k.')
plt.xlabel('Time (s)')
plt.ylabel('Voltage (V)')
plt.title('HP 34401A measurement (Range: 10 V (DC), Resolution: \n 4.5 digits @ ' + str(np.round((len(df)-1)/df.iloc[N-1].t, 3)) + ' Sa/s, $f$ = 0.1 Hz, $v_0$ = 2 V$_{pp}$)')
plt.grid(True)
plt.savefig('Measurement_result.png')
plt.show()

Now we could do some statistics or fit a sine function to it. I’ll explain this in a future blog post. A small bonus can be achieved via the following command:

dmm.write('DISP:TEXT "73 DE DH7DN"')